source: arduino-1-6-7/trunk/fuentes/arduino-ide-amd64/hardware/arduino/avr/firmwares/atmegaxxu2/arduino-usbdfu/readme.txt @ 4837

Last change on this file since 4837 was 4837, checked in by daduve, 2 years ago

Adding new version

File size: 434 bytes
Line 
1To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader:
21. unpack the source into LUFA's Bootloader directory
32. set ARDUINO_MODEL_PID in the makefile as appropriate
43. do "make clean; make; make program"
5
6Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU".  Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory)
7
Note: See TracBrowser for help on using the repository browser.