source: arduino-1-6-7/trunk/fuentes/arduino-ide-amd64/libraries/Adafruit_CircuitPlayground/.github/ @ 4837

Last change on this file since 4837 was 4837, checked in by daduve, 2 years ago

Adding new version

File size: 2.6 KB
1Thank you for opening an issue on an Adafruit Arduino library repository.  To
2improve the speed of resolution please review the following guidelines and
3common troubleshooting steps below before creating the issue:
5- **Do not use GitHub issues for troubleshooting projects and issues.**  Instead use
6  the forums at to ask questions and troubleshoot why
7  something isn't working as expected.  In many cases the problem is a common issue
8  that you will more quickly receive help from the forum community.  GitHub issues
9  are meant for known defects in the code.  If you don't know if there is a defect
10  in the code then start with troubleshooting on the forum first.
12- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
13  check all of the steps and commands to run have been followed.  Consult the
14  forum if you're unsure or have questions about steps in a guide/tutorial.
16- **For Arduino projects check these very common issues to ensure they don't apply**:
18  - For uploading sketches or communicating with the board make sure you're using
19    a **USB data cable** and **not** a **USB charge-only cable**.  It is sometimes
20    very hard to tell the difference between a data and charge cable!  Try using the
21    cable with other devices or swapping to another cable to confirm it is not
22    the problem.
24  - **Be sure you are supplying adequate power to the board.**  Check the specs of
25    your board and plug in an external power supply.  In many cases just
26    plugging a board into your computer is not enough to power it and other
27    peripherals.
29  - **Double check all soldering joints and connections.**  Flakey connections
30    cause many mysterious problems.  See the [guide to excellent soldering]( for examples of good solder joints.
32  - **Ensure you are using an official Arduino or Adafruit board.** We can't
33    guarantee a clone board will have the same functionality and work as expected
34    with this code and don't support them.
36If you're sure this issue is a defect in the code and checked the steps above
37please fill in the following fields to provide enough troubleshooting information.
38You may delete the guideline and text above to just leave the following details:
42- Arduino IDE version (found in Arduino -> About Arduino menu):  **INSERT ARDUINO
45- List the steps to reproduce the problem below (if possible attach a sketch or
46  copy the sketch code in too): **LIST REPRO STEPS BELOW**
Note: See TracBrowser for help on using the repository browser.