source: arduino-1-6-7/trunk/fuentes/arduino-ide-amd64/libraries/Bridge/examples/Datalogger/Datalogger.ino @ 46

Last change on this file since 46 was 46, checked in by jrpelegrina, 4 years ago

First release to Xenial

File size: 2.6 KB
Line 
1/*
2  SD card datalogger
3
4 This example shows how to log data from three analog sensors
5 to an SD card mounted on the Arduino Yún using the Bridge library.
6
7 The circuit:
8 * analog sensors on analog pins 0, 1 and 2
9 * SD card attached to SD card slot of the Arduino Yún
10
11 Prepare your SD card creating an empty folder in the SD root
12 named "arduino". This will ensure that the Yún will create a link
13 to the SD to the "/mnt/sd" path.
14
15 You can remove the SD card while the Linux and the
16 sketch are running but be careful not to remove it while
17 the system is writing to it.
18
19 created  24 Nov 2010
20 modified 9 Apr 2012
21 by Tom Igoe
22 adapted to the Yún Bridge library 20 Jun 2013
23 by Federico Vanzati
24 modified  21 Jun 2013
25 by Tom Igoe
26
27 This example code is in the public domain.
28
29 http://www.arduino.cc/en/Tutorial/YunDatalogger
30
31 */
32
33#include <FileIO.h>
34
35void setup() {
36  // Initialize the Bridge and the Serial
37  Bridge.begin();
38  Serial.begin(9600);
39  FileSystem.begin();
40
41  while (!Serial); // wait for Serial port to connect.
42  Serial.println("Filesystem datalogger\n");
43}
44
45
46void loop() {
47  // make a string that start with a timestamp for assembling the data to log:
48  String dataString;
49  dataString += getTimeStamp();
50  dataString += " = ";
51
52  // read three sensors and append to the string:
53  for (int analogPin = 0; analogPin < 3; analogPin++) {
54    int sensor = analogRead(analogPin);
55    dataString += String(sensor);
56    if (analogPin < 2) {
57      dataString += ",";  // separate the values with a comma
58    }
59  }
60
61  // open the file. note that only one file can be open at a time,
62  // so you have to close this one before opening another.
63  // The FileSystem card is mounted at the following "/mnt/FileSystema1"
64  File dataFile = FileSystem.open("/mnt/sd/datalog.txt", FILE_APPEND);
65
66  // if the file is available, write to it:
67  if (dataFile) {
68    dataFile.println(dataString);
69    dataFile.close();
70    // print to the serial port too:
71    Serial.println(dataString);
72  }
73  // if the file isn't open, pop up an error:
74  else {
75    Serial.println("error opening datalog.txt");
76  }
77
78  delay(15000);
79
80}
81
82// This function return a string with the time stamp
83String getTimeStamp() {
84  String result;
85  Process time;
86  // date is a command line utility to get the date and the time
87  // in different formats depending on the additional parameter
88  time.begin("date");
89  time.addParameter("+%D-%T");  // parameters: D for the complete date mm/dd/yy
90  //             T for the time hh:mm:ss
91  time.run();  // run the command
92
93  // read the output of the command
94  while (time.available() > 0) {
95    char c = time.read();
96    if (c != '\n') {
97      result += c;
98    }
99  }
100
101  return result;
102}
Note: See TracBrowser for help on using the repository browser.