source: arduino-1-6-7/trunk/fuentes/arduino-ide-amd64/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino @ 46

Last change on this file since 46 was 46, checked in by jrpelegrina, 4 years ago

First release to Xenial

File size: 3.3 KB
Line 
1/*
2  Temperature web interface
3
4 This example shows how to serve data from an analog input
5 via the Arduino Yún's built-in webserver using the Bridge library.
6
7 The circuit:
8 * TMP36 temperature sensor on analog pin A1
9 * SD card attached to SD card slot of the Arduino Yún
10
11 This sketch must be uploaded via wifi. REST API must be set to "open".
12
13 Prepare your SD card with an empty folder in the SD root
14 named "arduino" and a subfolder of that named "www".
15 This will ensure that the Yún will create a link
16 to the SD to the "/mnt/sd" path.
17
18 In this sketch folder is a basic webpage and a copy of zepto.js, a
19 minimized version of jQuery.  When you upload your sketch, these files
20 will be placed in the /arduino/www/TemperatureWebPanel folder on your SD card.
21
22 You can then go to http://arduino.local/sd/TemperatureWebPanel
23 to see the output of this sketch.
24
25 You can remove the SD card while the Linux and the
26 sketch are running but be careful not to remove it while
27 the system is writing to it.
28
29 created  6 July 2013
30 by Tom Igoe
31
32 This example code is in the public domain.
33
34 http://www.arduino.cc/en/Tutorial/TemperatureWebPanel
35
36 */
37
38#include <Bridge.h>
39#include <BridgeServer.h>
40#include <BridgeClient.h>
41
42// Listen on default port 5555, the webserver on the Yún
43// will forward there all the HTTP requests for us.
44BridgeServer server;
45String startString;
46long hits = 0;
47
48void setup() {
49  Serial.begin(9600);
50
51  // Bridge startup
52  pinMode(13, OUTPUT);
53  digitalWrite(13, LOW);
54  Bridge.begin();
55  digitalWrite(13, HIGH);
56
57  // using A0 and A2 as vcc and gnd for the TMP36 sensor:
58  pinMode(A0, OUTPUT);
59  pinMode(A2, OUTPUT);
60  digitalWrite(A0, HIGH);
61  digitalWrite(A2, LOW);
62
63  // Listen for incoming connection only from localhost
64  // (no one from the external network could connect)
65  server.listenOnLocalhost();
66  server.begin();
67
68  // get the time that this sketch started:
69  Process startTime;
70  startTime.runShellCommand("date");
71  while (startTime.available()) {
72    char c = startTime.read();
73    startString += c;
74  }
75}
76
77void loop() {
78  // Get clients coming from server
79  BridgeClient client = server.accept();
80
81  // There is a new client?
82  if (client) {
83    // read the command
84    String command = client.readString();
85    command.trim();        //kill whitespace
86    Serial.println(command);
87    // is "temperature" command?
88    if (command == "temperature") {
89
90      // get the time from the server:
91      Process time;
92      time.runShellCommand("date");
93      String timeString = "";
94      while (time.available()) {
95        char c = time.read();
96        timeString += c;
97      }
98      Serial.println(timeString);
99      int sensorValue = analogRead(A1);
100      // convert the reading to millivolts:
101      float voltage = sensorValue * (5000.0f / 1024.0f);
102      // convert the millivolts to temperature celsius:
103      float temperature = (voltage - 500.0f) / 10.0f;
104      // print the temperature:
105      client.print("Current time on the Y&uacute;n: ");
106      client.println(timeString);
107      client.print("<br>Current temperature: ");
108      client.print(temperature);
109      client.print(" &deg;C");
110      client.print("<br>This sketch has been running since ");
111      client.print(startString);
112      client.print("<br>Hits so far: ");
113      client.print(hits);
114    }
115
116    // Close connection and free resources.
117    client.stop();
118    hits++;
119  }
120
121  delay(50); // Poll every 50ms
122}
123
124
125
Note: See TracBrowser for help on using the repository browser.