source: arduino-1-6-7/trunk/fuentes/arduino-ide-amd64/libraries/Esplora/examples/Beginners/EsploraAccelerometer/EsploraAccelerometer.ino @ 46

Last change on this file since 46 was 46, checked in by jrpelegrina, 4 years ago

First release to Xenial

File size: 1.1 KB
Line 
1/*
2  Esplora Accelerometer
3
4 This  sketch shows you how to read the values from the accelerometer.
5 To see it in action, open the serial monitor and tilt the board. You'll see
6 the accelerometer values for each axis change when you tilt the board
7 on that axis.
8
9 Created on 22 Dec 2012
10 by Tom Igoe
11
12 This example is in the public domain.
13 */
14
15#include <Esplora.h>
16
17void setup()
18{
19  Serial.begin(9600);        // initialize serial communications with your computer
20}
21
22void loop()
23{
24  int xAxis = Esplora.readAccelerometer(X_AXIS);    // read the X axis
25  int yAxis = Esplora.readAccelerometer(Y_AXIS);    // read the Y axis
26  int zAxis = Esplora.readAccelerometer(Z_AXIS);    // read the Z axis
27
28  Serial.print("x: ");      // print the label for X
29  Serial.print(xAxis);      // print the value for the X axis
30  Serial.print("\ty: ");    // print a tab character, then the label for Y
31  Serial.print(yAxis);      // print the value for the Y axis
32  Serial.print("\tz: ");    // print a tab character, then the label for Z
33  Serial.println(zAxis);    // print the value for the Z axis
34
35  delay(500);              // wait half a second (500 milliseconds)
36}
37
38
Note: See TracBrowser for help on using the repository browser.