source: squid-ssl/trunk/fuentes/Makefile @ 5495

Last change on this file since 5495 was 5495, checked in by Juanma, 22 months ago

Initial release

File size: 33.6 KB
Line 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# Makefile.  Generated from Makefile.in by configure.
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15
16
17am__is_gnu_make = { \
18  if test -z '$(MAKELEVEL)'; then \
19    false; \
20  elif test -n '$(MAKE_HOST)'; then \
21    true; \
22  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
23    true; \
24  else \
25    false; \
26  fi; \
27}
28am__make_running_with_option = \
29  case $${target_option-} in \
30      ?) ;; \
31      *) echo "am__make_running_with_option: internal error: invalid" \
32              "target option '$${target_option-}' specified" >&2; \
33         exit 1;; \
34  esac; \
35  has_opt=no; \
36  sane_makeflags=$$MAKEFLAGS; \
37  if $(am__is_gnu_make); then \
38    sane_makeflags=$$MFLAGS; \
39  else \
40    case $$MAKEFLAGS in \
41      *\\[\ \   ]*) \
42        bs=\\; \
43        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
45    esac; \
46  fi; \
47  skip_next=no; \
48  strip_trailopt () \
49  { \
50    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
51  }; \
52  for flg in $$sane_makeflags; do \
53    test $$skip_next = yes && { skip_next=no; continue; }; \
54    case $$flg in \
55      *=*|--*) continue;; \
56        -*I) strip_trailopt 'I'; skip_next=yes;; \
57      -*I?*) strip_trailopt 'I';; \
58        -*O) strip_trailopt 'O'; skip_next=yes;; \
59      -*O?*) strip_trailopt 'O';; \
60        -*l) strip_trailopt 'l'; skip_next=yes;; \
61      -*l?*) strip_trailopt 'l';; \
62      -[dEDm]) skip_next=yes;; \
63      -[JT]) skip_next=yes;; \
64    esac; \
65    case $$flg in \
66      *$$target_option*) has_opt=yes; break;; \
67    esac; \
68  done; \
69  test $$has_opt = yes
70am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72pkgdatadir = $(datadir)/squid
73pkgincludedir = $(includedir)/squid
74pkglibdir = $(libdir)/squid
75pkglibexecdir = $(libexecdir)/squid
76am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
77install_sh_DATA = $(install_sh) -c -m 644
78install_sh_PROGRAM = $(install_sh) -c
79install_sh_SCRIPT = $(install_sh) -c
80INSTALL_HEADER = $(INSTALL_DATA)
81transform = $(program_transform_name)
82NORMAL_INSTALL = :
83PRE_INSTALL = :
84POST_INSTALL = :
85NORMAL_UNINSTALL = :
86PRE_UNINSTALL = :
87POST_UNINSTALL = :
88build_triplet = x86_64-pc-linux-gnu
89host_triplet = x86_64-pc-linux-gnu
90am__append_1 = libltdl
91subdir = .
92ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
93am__aclocal_m4_deps = $(top_srcdir)/acinclude/ax_with_prog.m4 \
94        $(top_srcdir)/acinclude/init.m4 \
95        $(top_srcdir)/acinclude/squid-util.m4 \
96        $(top_srcdir)/acinclude/compiler-flags.m4 \
97        $(top_srcdir)/acinclude/os-deps.m4 \
98        $(top_srcdir)/acinclude/krb5.m4 $(top_srcdir)/acinclude/pam.m4 \
99        $(top_srcdir)/acinclude/pkg.m4 \
100        $(top_srcdir)/acinclude/lib-checks.m4 \
101        $(top_srcdir)/acinclude/ax_cxx_compile_stdcxx_11.m4 \
102        $(top_srcdir)/acinclude/ax_cxx_0x_types.m4 \
103        $(top_srcdir)/helpers/basic_auth/modules.m4 \
104        $(top_srcdir)/helpers/basic_auth/DB/required.m4 \
105        $(top_srcdir)/helpers/basic_auth/LDAP/required.m4 \
106        $(top_srcdir)/helpers/basic_auth/MSNT-multi-domain/required.m4 \
107        $(top_srcdir)/helpers/basic_auth/NCSA/required.m4 \
108        $(top_srcdir)/helpers/basic_auth/NIS/required.m4 \
109        $(top_srcdir)/helpers/basic_auth/PAM/required.m4 \
110        $(top_srcdir)/helpers/basic_auth/POP3/required.m4 \
111        $(top_srcdir)/helpers/basic_auth/RADIUS/required.m4 \
112        $(top_srcdir)/helpers/basic_auth/SASL/required.m4 \
113        $(top_srcdir)/helpers/basic_auth/SMB/required.m4 \
114        $(top_srcdir)/helpers/basic_auth/SMB_LM/required.m4 \
115        $(top_srcdir)/helpers/basic_auth/SSPI/required.m4 \
116        $(top_srcdir)/helpers/basic_auth/fake/required.m4 \
117        $(top_srcdir)/helpers/basic_auth/getpwnam/required.m4 \
118        $(top_srcdir)/helpers/digest_auth/modules.m4 \
119        $(top_srcdir)/helpers/digest_auth/LDAP/required.m4 \
120        $(top_srcdir)/helpers/digest_auth/eDirectory/required.m4 \
121        $(top_srcdir)/helpers/digest_auth/file/required.m4 \
122        $(top_srcdir)/helpers/negotiate_auth/modules.m4 \
123        $(top_srcdir)/helpers/negotiate_auth/SSPI/required.m4 \
124        $(top_srcdir)/helpers/negotiate_auth/kerberos/required.m4 \
125        $(top_srcdir)/helpers/negotiate_auth/wrapper/required.m4 \
126        $(top_srcdir)/helpers/ntlm_auth/modules.m4 \
127        $(top_srcdir)/helpers/ntlm_auth/fake/required.m4 \
128        $(top_srcdir)/helpers/ntlm_auth/SSPI/required.m4 \
129        $(top_srcdir)/helpers/ntlm_auth/smb_lm/required.m4 \
130        $(top_srcdir)/helpers/log_daemon/modules.m4 \
131        $(top_srcdir)/helpers/log_daemon/DB/required.m4 \
132        $(top_srcdir)/helpers/log_daemon/file/required.m4 \
133        $(top_srcdir)/helpers/external_acl/modules.m4 \
134        $(top_srcdir)/helpers/external_acl/AD_group/required.m4 \
135        $(top_srcdir)/helpers/external_acl/LDAP_group/required.m4 \
136        $(top_srcdir)/helpers/external_acl/LM_group/required.m4 \
137        $(top_srcdir)/helpers/external_acl/delayer/required.m4 \
138        $(top_srcdir)/helpers/external_acl/SQL_session/required.m4 \
139        $(top_srcdir)/helpers/external_acl/eDirectory_userip/required.m4 \
140        $(top_srcdir)/helpers/external_acl/file_userip/required.m4 \
141        $(top_srcdir)/helpers/external_acl/kerberos_ldap_group/required.m4 \
142        $(top_srcdir)/helpers/external_acl/session/required.m4 \
143        $(top_srcdir)/helpers/external_acl/time_quota/required.m4 \
144        $(top_srcdir)/helpers/external_acl/unix_group/required.m4 \
145        $(top_srcdir)/helpers/external_acl/wbinfo_group/required.m4 \
146        $(top_srcdir)/helpers/url_rewrite/modules.m4 \
147        $(top_srcdir)/helpers/url_rewrite/fake/required.m4 \
148        $(top_srcdir)/helpers/storeid_rewrite/modules.m4 \
149        $(top_srcdir)/helpers/storeid_rewrite/file/required.m4 \
150        $(top_srcdir)/configure.ac
151am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
152        $(ACLOCAL_M4)
153DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
154        $(am__configure_deps) $(am__DIST_COMMON)
155am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
156 configure.lineno config.status.lineno
157mkinstalldirs = $(install_sh) -d
158CONFIG_HEADER = $(top_builddir)/include/autoconf.h
159CONFIG_CLEAN_FILES =
160CONFIG_CLEAN_VPATH_FILES =
161AM_V_P = $(am__v_P_$(V))
162am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
163am__v_P_0 = false
164am__v_P_1 = :
165AM_V_GEN = $(am__v_GEN_$(V))
166am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
167am__v_GEN_0 = @echo "  GEN     " $@;
168am__v_GEN_1 = 
169AM_V_at = $(am__v_at_$(V))
170am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
171am__v_at_0 = @
172am__v_at_1 = 
173SOURCES =
174DIST_SOURCES =
175RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
176        ctags-recursive dvi-recursive html-recursive info-recursive \
177        install-data-recursive install-dvi-recursive \
178        install-exec-recursive install-html-recursive \
179        install-info-recursive install-pdf-recursive \
180        install-ps-recursive install-recursive installcheck-recursive \
181        installdirs-recursive pdf-recursive ps-recursive \
182        tags-recursive uninstall-recursive
183am__can_run_installinfo = \
184  case $$AM_UPDATE_INFO_DIR in \
185    n|no|NO) false;; \
186    *) (install-info --version) >/dev/null 2>&1;; \
187  esac
188RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
189  distclean-recursive maintainer-clean-recursive
190am__recursive_targets = \
191  $(RECURSIVE_TARGETS) \
192  $(RECURSIVE_CLEAN_TARGETS) \
193  $(am__extra_recursive_targets)
194AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
195        cscope distdir dist dist-all distcheck
196am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
197# Read a list of newline-separated strings from the standard input,
198# and print each of them once, without duplicates.  Input order is
199# *not* preserved.
200am__uniquify_input = $(AWK) '\
201  BEGIN { nonempty = 0; } \
202  { items[$$0] = 1; nonempty = 1; } \
203  END { if (nonempty) { for (i in items) print i; }; } \
204'
205# Make sure the list of sources is unique.  This is necessary because,
206# e.g., the same source file might be shared among _SOURCES variables
207# for different programs/libraries.
208am__define_uniq_tagged_files = \
209  list='$(am__tagged_files)'; \
210  unique=`for i in $$list; do \
211    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
212  done | $(am__uniquify_input)`
213ETAGS = etags
214CTAGS = ctags
215CSCOPE = cscope
216am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/cfgaux/compile \
217        $(top_srcdir)/cfgaux/config.guess \
218        $(top_srcdir)/cfgaux/config.sub \
219        $(top_srcdir)/cfgaux/install-sh $(top_srcdir)/cfgaux/ltmain.sh \
220        $(top_srcdir)/cfgaux/missing \
221        $(top_srcdir)/include/autoconf.h.in COPYING ChangeLog INSTALL \
222        README cfgaux/compile cfgaux/config.guess cfgaux/config.sub \
223        cfgaux/depcomp cfgaux/install-sh cfgaux/ltmain.sh \
224        cfgaux/missing
225DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
226distdir = $(PACKAGE)-$(VERSION)
227top_distdir = $(distdir)
228am__remove_distdir = \
229  if test -d "$(distdir)"; then \
230    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
231      && rm -rf "$(distdir)" \
232      || { sleep 5 && rm -rf "$(distdir)"; }; \
233  else :; fi
234am__post_remove_distdir = $(am__remove_distdir)
235am__relativize = \
236  dir0=`pwd`; \
237  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
238  sed_rest='s,^[^/]*/*,,'; \
239  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
240  sed_butlast='s,/*[^/]*$$,,'; \
241  while test -n "$$dir1"; do \
242    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
243    if test "$$first" != "."; then \
244      if test "$$first" = ".."; then \
245        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
246        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
247      else \
248        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
249        if test "$$first2" = "$$first"; then \
250          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
251        else \
252          dir2="../$$dir2"; \
253        fi; \
254        dir0="$$dir0"/"$$first"; \
255      fi; \
256    fi; \
257    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
258  done; \
259  reldir="$$dir2"
260DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
261GZIP_ENV = --best
262DIST_TARGETS = dist-bzip2 dist-gzip
263distuninstallcheck_listfiles = find . -type f -print
264am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
265  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
266distcleancheck_listfiles = find . -type f -print
267ACLOCAL = ${SHELL} /media/sdb/svn/xenial/squid-ssl/trunk/fuentes/cfgaux/missing aclocal-1.15
268ADAPTATION_LIBS = adaptation/libadaptation.la
269ALLOCA =
270AMTAR = $${TAR-tar}
271AM_DEFAULT_VERBOSITY = 1
272AR = /usr/bin/ar
273AR_R = /usr/bin/ar r
274AUTH_LIBS_TO_BUILD =  basic/libbasic.la digest/libdigest.la negotiate/libnegotiate.la ntlm/libntlm.la
275AUTH_MODULES =  basic digest negotiate ntlm
276AUTOCONF = ${SHELL} /media/sdb/svn/xenial/squid-ssl/trunk/fuentes/cfgaux/missing autoconf
277AUTOHEADER = ${SHELL} /media/sdb/svn/xenial/squid-ssl/trunk/fuentes/cfgaux/missing autoheader
278AUTOMAKE = ${SHELL} /media/sdb/svn/xenial/squid-ssl/trunk/fuentes/cfgaux/missing automake-1.15
279AWK = gawk
280BASIC_AUTH_HELPERS =  DB fake getpwnam LDAP NCSA NIS PAM POP3 RADIUS SASL SMB
281BUILDCXX = g++
282BUILDCXXFLAGS = -g -O2 -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -Wl,-z,now
283BZR =
284CACHE_EFFECTIVE_USER = proxy
285CC = gcc
286CCDEPMODE = depmode=none
287CFLAGS = -m64 -g -O2 -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wall
288CGIEXT = .cgi
289CHMOD = /bin/chmod
290CPP = gcc -E
291CPPFLAGS = -I/usr/include/libxml2 -Wdate-time -D_FORTIFY_SOURCE=2
292CPPUNITCONFIG = /usr/bin/cppunit-config
293CRYPTLIB = -lcrypt
294CXX = g++
295CXXCPP = g++ -E
296CXXDEPMODE = depmode=none
297CXXFLAGS = -m64  -I/usr/include/p11-kit-1 -g -O2 -fPIE -fstack-protector-strong -Wformat -Werror=format-security -std=c++11
298CYGPATH_W = echo
299DEFAULT_HOSTS = /etc/hosts
300DEFAULT_LOG_DIR = /var/log/squid-ssl
301DEFAULT_PID_FILE = /var/run/squid-ssl.pid
302DEFAULT_SWAP_DIR = /var/spool/squid-ssl
303DEFS = -DHAVE_CONFIG_H
304DEPDIR = .deps
305DIGEST_AUTH_HELPERS =  file LDAP
306DISK_LIBS =  libAIO.a libBlocking.a libDiskDaemon.a libDiskThreads.a libIpcIo.a libMmapped.a
307DISK_LINKOBJS =  DiskIO/AIO/AIODiskIOModule.o DiskIO/Blocking/BlockingDiskIOModule.o DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o DiskIO/DiskThreads/DiskThreadsDiskIOModule.o DiskIO/IpcIo/IpcIoDiskIOModule.o DiskIO/Mmapped/MmappedDiskIOModule.o
308DISK_MODULES =  AIO Blocking DiskDaemon DiskThreads IpcIo Mmapped
309DISK_OS_LIBS =  -lrt -lpthread
310DISK_PROGRAMS =  DiskIO/DiskDaemon/diskd
311DLLTOOL = false
312DSYMUTIL =
313DUMPBIN =
314ECAP_LIBS = ecap/libsquid-ecap.la
315ECHO_C =
316ECHO_N = -n
317ECHO_T =
318EGREP = /bin/egrep
319EPOLL_LIBS =
320EUILIB =
321EXEEXT =
322EXPATLIB = -lexpat
323EXTERNAL_ACL_HELPERS =  file_userip kerberos_ldap_group LDAP_group session SQL_session unix_group wbinfo_group
324EXT_LIBECAP_CFLAGS =
325EXT_LIBECAP_LIBS = -lecap
326FALSE = /bin/false
327FGREP = /bin/fgrep
328GREP = grep
329HAVE_CXX11 = 1
330ICAP_LIBS = icap/libicap.la
331INCLTDL =
332INSTALL = /usr/bin/install -c
333INSTALL_DATA = ${INSTALL} -m 644
334INSTALL_PROGRAM = ${INSTALL}
335INSTALL_SCRIPT = ${INSTALL}
336INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
337KRB5INCS = -isystem /usr/include/mit-krb5
338KRB5LIBS =  -L/usr/lib/x86_64-linux-gnu/mit-krb5 -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err
339LBERLIB = -llber
340LD = /usr/bin/ld -m elf_x86_64
341LDAPLIB = -lldap
342LDFLAGS = -m64 -Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -Wl,-z,now
343LIBADD_DL = -ldl
344LIBADD_DLD_LINK =
345LIBADD_DLOPEN = -ldl
346LIBADD_SHL_LOAD =
347LIBGNUTLS_CFLAGS = -I/usr/include/p11-kit-1
348LIBGNUTLS_LIBS = -lgnutls
349LIBLTDL = -lltdl
350LIBOBJS =
351LIBOPENSSL_CFLAGS =
352LIBOPENSSL_LIBS = -lssl -lcrypto
353LIBS =
354LIBSASL = -lsasl2
355LIBTOOL = $(SHELL) $(top_builddir)/libtool
356LIB_DB = -ldb
357LIB_KRB5_CFLAGS = -isystem /usr/include/mit-krb5
358LIB_KRB5_LIBS = -L/usr/lib/x86_64-linux-gnu/mit-krb5 -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err
359LINUXDOC = /bin/false
360LIPO =
361LN = /bin/ln
362LN_S = ln -s
363LOG_DAEMON_HELPERS =  DB file
364LTDLDEPS =
365LTDLINCL =
366LTDLOPEN = libltdl
367LTLIBOBJS =
368LT_ARGZ_H =
369LT_CONFIG_H = include/autoconf.h
370LT_DLLOADERS =  libltdl/dlopen.la
371LT_DLPREOPEN = -dlpreopen libltdl/dlopen.la
372LT_SYS_LIBRARY_PATH =
373MAINT = #
374MAKEINFO = ${SHELL} /media/sdb/svn/xenial/squid-ssl/trunk/fuentes/cfgaux/missing makeinfo
375MANIFEST_TOOL = :
376MINGW_LIBS =
377MKDIR = /bin/mkdir
378MKDIR_P = /bin/mkdir -p
379MV = /bin/mv
380NEGOTIATE_AUTH_HELPERS =  kerberos wrapper
381NETTLELIB =  -lnettle
382NM = /usr/bin/nm -B
383NMEDIT =
384NTLM_AUTH_HELPERS =  fake smb_lm
385OBJDUMP = objdump
386OBJEXT = o
387OTOOL =
388OTOOL64 =
389PACKAGE = squid
390PACKAGE_BUGREPORT = http://bugs.squid-cache.org/
391PACKAGE_NAME = Squid Web Proxy
392PACKAGE_STRING = Squid Web Proxy 3.5.12
393PACKAGE_TARNAME = squid
394PACKAGE_URL =
395PACKAGE_VERSION = 3.5.12
396PATH_SEPARATOR = :
397PERL = /usr/bin/perl
398PKG_CONFIG = /usr/bin/pkg-config
399PKG_CONFIG_LIBDIR =
400PKG_CONFIG_PATH =
401PO2HTML = off
402PO2TEXT = off
403POD2MAN = /usr/bin/pod2man
404RANLIB = ranlib
405REGEXLIB =
406REPL_LIBS = liblru.a libheap.a
407REPL_OBJS = repl/liblru.a repl/libheap.a
408REPL_POLICIES = lru heap
409RM = /bin/rm -f
410SED = /bin/sed
411SET_MAKE =
412SH = /bin/sh
413SHELL = /bin/bash
414SMBCLIENT = /usr/bin/smbclient
415SNMPLIB = ../lib/snmplib/libsnmplib.la
416SQUID_CFLAGS = -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Wshadow -Werror -pipe -D_REENTRANT
417SQUID_CPPUNIT_INC =
418SQUID_CPPUNIT_LA =
419SQUID_CPPUNIT_LIBS = -L/usr/lib/x86_64-linux-gnu -lcppunit -ldl
420SQUID_CXXFLAGS = -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Wshadow -Werror -pipe -D_REENTRANT
421SSLLIB =  -lssl -lcrypto  -lgnutls
422STOREID_REWRITE_HELPERS =  file
423STORE_LIBS_TO_ADD =  fs/libufs.la fs/libaufs.la fs/libdiskd.la fs/librock.la
424STORE_LIBS_TO_BUILD =  libufs.la libaufs.la libdiskd.la librock.la
425STORE_TESTS =
426STRIP = strip
427TR = /usr/bin/tr
428TRUE = /bin/true
429URL_REWRITE_HELPERS =  fake
430VERSION = 3.5.12
431WBINFO =
432WIN32_PSAPI =
433XMLLIB = -lxml2
434XTRA_LIBS = -lm -lnsl -lresolv -lcap -lnetfilter_conntrack -lrt
435XTRA_OBJS =
436abs_builddir = /media/sdb/svn/xenial/squid-ssl/trunk/fuentes
437abs_srcdir = /media/sdb/svn/xenial/squid-ssl/trunk/fuentes
438abs_top_builddir = /media/sdb/svn/xenial/squid-ssl/trunk/fuentes
439abs_top_srcdir = /media/sdb/svn/xenial/squid-ssl/trunk/fuentes
440ac_ct_AR =
441ac_ct_CC = gcc
442ac_ct_CXX = g++
443ac_ct_DUMPBIN =
444am__include = include
445am__leading_dot = .
446am__quote =
447am__tar = tar --format=ustar -chf - "$$tardir"
448am__untar = tar -xf -
449bindir = ${exec_prefix}/bin
450build = x86_64-pc-linux-gnu
451build_alias = x86_64-linux-gnu
452build_cpu = x86_64
453build_os = linux-gnu
454build_vendor = pc
455builddir = .
456datadir = /usr/share/squid-ssl
457datarootdir = ${prefix}/share
458docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
459dvidir = ${docdir}
460exec_prefix = ${prefix}
461host = x86_64-pc-linux-gnu
462host_alias =
463host_cpu = x86_64
464host_os = linux-gnu
465host_vendor = pc
466htmldir = ${docdir}
467includedir = ${prefix}/include
468infodir = ${prefix}/share/info
469install_sh = ${SHELL} /media/sdb/svn/xenial/squid-ssl/trunk/fuentes/cfgaux/install-sh
470krb5_config =
471libdir = ${exec_prefix}/lib
472libexecdir = /usr/lib/squid-ssl
473localedir = ${datarootdir}/locale
474localstatedir = /var
475ltdl_LIBOBJS =  lt__strl.o
476ltdl_LTLIBOBJS =  lt__strl.lo
477mandir = /usr/share/man
478mkdir_p = $(MKDIR_P)
479oldincludedir = /usr/include
480pdfdir = ${docdir}
481prefix = /usr
482program_transform_name = s&$$&-ssl&
483psdir = ${docdir}
484runstatedir = ${localstatedir}/run
485sbindir = ${exec_prefix}/sbin
486sharedstatedir = ${prefix}/com
487srcdir = .
488subdirs =  libltdl
489sys_symbol_underscore = no
490sysconfdir = /etc/squid-ssl
491target_alias =
492top_build_prefix =
493top_builddir = .
494top_srcdir = .
495AUTOMAKE_OPTIONS = dist-bzip2 1.5 foreign
496DIST_SUBDIRS = compat lib libltdl scripts icons errors contrib doc helpers src test-suite tools
497SUBDIRS = compat lib $(am__append_1) scripts icons errors doc helpers \
498        src tools test-suite
499DISTCLEANFILES = include/stamp-h include/stamp-h[0-9]*
500DEFAULT_PINGER = $(libexecdir)/`echo pinger | sed '$(transform);s/$$/$(EXEEXT)/'`
501EXTRA_DIST = \
502        ChangeLog \
503        CONTRIBUTORS \
504        COPYING \
505        CREDITS \
506        INSTALL \
507        QUICKSTART \
508        README \
509        SPONSORS \
510        bootstrap.sh \
511        po4a.conf
512
513all: all-recursive
514
515.SUFFIXES:
516am--refresh: Makefile
517        @:
518$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
519        @for dep in $?; do \
520          case '$(am__configure_deps)' in \
521            *$$dep*) \
522              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
523              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
524                && exit 0; \
525              exit 1;; \
526          esac; \
527        done; \
528        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
529        $(am__cd) $(top_srcdir) && \
530          $(AUTOMAKE) --foreign Makefile
531Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
532        @case '$?' in \
533          *config.status*) \
534            echo ' $(SHELL) ./config.status'; \
535            $(SHELL) ./config.status;; \
536          *) \
537            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
538            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
539        esac;
540
541$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
542        $(SHELL) ./config.status --recheck
543
544$(top_srcdir)/configure: # $(am__configure_deps)
545        $(am__cd) $(srcdir) && $(AUTOCONF)
546$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
547        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
548$(am__aclocal_m4_deps):
549
550include/autoconf.h: include/stamp-h1
551        @test -f $@ || rm -f include/stamp-h1
552        @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1
553
554include/stamp-h1: $(top_srcdir)/include/autoconf.h.in $(top_builddir)/config.status
555        @rm -f include/stamp-h1
556        cd $(top_builddir) && $(SHELL) ./config.status include/autoconf.h
557$(top_srcdir)/include/autoconf.h.in: # $(am__configure_deps)
558        ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
559        rm -f include/stamp-h1
560        touch $@
561
562distclean-hdr:
563        -rm -f include/autoconf.h include/stamp-h1
564
565mostlyclean-libtool:
566        -rm -f *.lo
567
568clean-libtool:
569        -rm -rf .libs _libs
570
571distclean-libtool:
572        -rm -f libtool config.lt
573
574# This directory's subdirectories are mostly independent; you can cd
575# into them and run 'make' without going through this Makefile.
576# To change the values of 'make' variables: instead of editing Makefiles,
577# (1) if the variable is set in 'config.status', edit 'config.status'
578#     (which will cause the Makefiles to be regenerated when you run 'make');
579# (2) otherwise, pass the desired values on the 'make' command line.
580$(am__recursive_targets):
581        @fail=; \
582        if $(am__make_keepgoing); then \
583          failcom='fail=yes'; \
584        else \
585          failcom='exit 1'; \
586        fi; \
587        dot_seen=no; \
588        target=`echo $@ | sed s/-recursive//`; \
589        case "$@" in \
590          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
591          *) list='$(SUBDIRS)' ;; \
592        esac; \
593        for subdir in $$list; do \
594          echo "Making $$target in $$subdir"; \
595          if test "$$subdir" = "."; then \
596            dot_seen=yes; \
597            local_target="$$target-am"; \
598          else \
599            local_target="$$target"; \
600          fi; \
601          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
602          || eval $$failcom; \
603        done; \
604        if test "$$dot_seen" = "no"; then \
605          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
606        fi; test -z "$$fail"
607
608ID: $(am__tagged_files)
609        $(am__define_uniq_tagged_files); mkid -fID $$unique
610tags: tags-recursive
611TAGS: tags
612
613tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
614        set x; \
615        here=`pwd`; \
616        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
617          include_option=--etags-include; \
618          empty_fix=.; \
619        else \
620          include_option=--include; \
621          empty_fix=; \
622        fi; \
623        list='$(SUBDIRS)'; for subdir in $$list; do \
624          if test "$$subdir" = .; then :; else \
625            test ! -f $$subdir/TAGS || \
626              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
627          fi; \
628        done; \
629        $(am__define_uniq_tagged_files); \
630        shift; \
631        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
632          test -n "$$unique" || unique=$$empty_fix; \
633          if test $$# -gt 0; then \
634            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
635              "$$@" $$unique; \
636          else \
637            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
638              $$unique; \
639          fi; \
640        fi
641ctags: ctags-recursive
642
643CTAGS: ctags
644ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
645        $(am__define_uniq_tagged_files); \
646        test -z "$(CTAGS_ARGS)$$unique" \
647          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
648             $$unique
649
650GTAGS:
651        here=`$(am__cd) $(top_builddir) && pwd` \
652          && $(am__cd) $(top_srcdir) \
653          && gtags -i $(GTAGS_ARGS) "$$here"
654cscope: cscope.files
655        test ! -s cscope.files \
656          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
657clean-cscope:
658        -rm -f cscope.files
659cscope.files: clean-cscope cscopelist
660cscopelist: cscopelist-recursive
661
662cscopelist-am: $(am__tagged_files)
663        list='$(am__tagged_files)'; \
664        case "$(srcdir)" in \
665          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
666          *) sdir=$(subdir)/$(srcdir) ;; \
667        esac; \
668        for i in $$list; do \
669          if test -f "$$i"; then \
670            echo "$(subdir)/$$i"; \
671          else \
672            echo "$$sdir/$$i"; \
673          fi; \
674        done >> $(top_builddir)/cscope.files
675
676distclean-tags:
677        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
678        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
679
680distdir: $(DISTFILES)
681        $(am__remove_distdir)
682        test -d "$(distdir)" || mkdir "$(distdir)"
683        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
684        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
685        list='$(DISTFILES)'; \
686          dist_files=`for file in $$list; do echo $$file; done | \
687          sed -e "s|^$$srcdirstrip/||;t" \
688              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
689        case $$dist_files in \
690          */*) $(MKDIR_P) `echo "$$dist_files" | \
691                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
692                           sort -u` ;; \
693        esac; \
694        for file in $$dist_files; do \
695          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
696          if test -d $$d/$$file; then \
697            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
698            if test -d "$(distdir)/$$file"; then \
699              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
700            fi; \
701            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
702              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
703              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
704            fi; \
705            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
706          else \
707            test -f "$(distdir)/$$file" \
708            || cp -p $$d/$$file "$(distdir)/$$file" \
709            || exit 1; \
710          fi; \
711        done
712        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
713          if test "$$subdir" = .; then :; else \
714            $(am__make_dryrun) \
715              || test -d "$(distdir)/$$subdir" \
716              || $(MKDIR_P) "$(distdir)/$$subdir" \
717              || exit 1; \
718            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
719            $(am__relativize); \
720            new_distdir=$$reldir; \
721            dir1=$$subdir; dir2="$(top_distdir)"; \
722            $(am__relativize); \
723            new_top_distdir=$$reldir; \
724            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
725            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
726            ($(am__cd) $$subdir && \
727              $(MAKE) $(AM_MAKEFLAGS) \
728                top_distdir="$$new_top_distdir" \
729                distdir="$$new_distdir" \
730                am__remove_distdir=: \
731                am__skip_length_check=: \
732                am__skip_mode_fix=: \
733                distdir) \
734              || exit 1; \
735          fi; \
736        done
737        $(MAKE) $(AM_MAKEFLAGS) \
738          top_distdir="$(top_distdir)" distdir="$(distdir)" \
739          dist-hook
740        -test -n "$(am__skip_mode_fix)" \
741        || find "$(distdir)" -type d ! -perm -755 \
742                -exec chmod u+rwx,go+rx {} \; -o \
743          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
744          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
745          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
746        || chmod -R a+r "$(distdir)"
747dist-gzip: distdir
748        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
749        $(am__post_remove_distdir)
750dist-bzip2: distdir
751        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
752        $(am__post_remove_distdir)
753
754dist-lzip: distdir
755        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
756        $(am__post_remove_distdir)
757
758dist-xz: distdir
759        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
760        $(am__post_remove_distdir)
761
762dist-tarZ: distdir
763        @echo WARNING: "Support for distribution archives compressed with" \
764                       "legacy program 'compress' is deprecated." >&2
765        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
766        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
767        $(am__post_remove_distdir)
768
769dist-shar: distdir
770        @echo WARNING: "Support for shar distribution archives is" \
771                       "deprecated." >&2
772        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
773        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
774        $(am__post_remove_distdir)
775
776dist-zip: distdir
777        -rm -f $(distdir).zip
778        zip -rq $(distdir).zip $(distdir)
779        $(am__post_remove_distdir)
780
781dist dist-all:
782        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
783        $(am__post_remove_distdir)
784
785# This target untars the dist file and tries a VPATH configuration.  Then
786# it guarantees that the distribution is self-contained by making another
787# tarfile.
788distcheck: dist
789        case '$(DIST_ARCHIVES)' in \
790        *.tar.gz*) \
791          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
792        *.tar.bz2*) \
793          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
794        *.tar.lz*) \
795          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
796        *.tar.xz*) \
797          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
798        *.tar.Z*) \
799          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
800        *.shar.gz*) \
801          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
802        *.zip*) \
803          unzip $(distdir).zip ;;\
804        esac
805        chmod -R a-w $(distdir)
806        chmod u+w $(distdir)
807        mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
808        chmod a-w $(distdir)
809        test -d $(distdir)/_build || exit 0; \
810        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
811          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
812          && am__cwd=`pwd` \
813          && $(am__cd) $(distdir)/_build/sub \
814          && ../../configure \
815            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
816            $(DISTCHECK_CONFIGURE_FLAGS) \
817            --srcdir=../.. --prefix="$$dc_install_base" \
818          && $(MAKE) $(AM_MAKEFLAGS) \
819          && $(MAKE) $(AM_MAKEFLAGS) dvi \
820          && $(MAKE) $(AM_MAKEFLAGS) check \
821          && $(MAKE) $(AM_MAKEFLAGS) install \
822          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
823          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
824          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
825                distuninstallcheck \
826          && chmod -R a-w "$$dc_install_base" \
827          && ({ \
828               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
829               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
830               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
831               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
832                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
833              } || { rm -rf "$$dc_destdir"; exit 1; }) \
834          && rm -rf "$$dc_destdir" \
835          && $(MAKE) $(AM_MAKEFLAGS) dist \
836          && rm -rf $(DIST_ARCHIVES) \
837          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
838          && cd "$$am__cwd" \
839          || exit 1
840        $(am__post_remove_distdir)
841        @(echo "$(distdir) archives ready for distribution: "; \
842          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
843          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
844distuninstallcheck:
845        @test -n '$(distuninstallcheck_dir)' || { \
846          echo 'ERROR: trying to run $@ with an empty' \
847               '$$(distuninstallcheck_dir)' >&2; \
848          exit 1; \
849        }; \
850        $(am__cd) '$(distuninstallcheck_dir)' || { \
851          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
852          exit 1; \
853        }; \
854        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
855           || { echo "ERROR: files left after uninstall:" ; \
856                if test -n "$(DESTDIR)"; then \
857                  echo "  (check DESTDIR support)"; \
858                fi ; \
859                $(distuninstallcheck_listfiles) ; \
860                exit 1; } >&2
861distcleancheck: distclean
862        @if test '$(srcdir)' = . ; then \
863          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
864          exit 1 ; \
865        fi
866        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
867          || { echo "ERROR: files left in build directory after distclean:" ; \
868               $(distcleancheck_listfiles) ; \
869               exit 1; } >&2
870check-am: all-am
871check: check-recursive
872all-am: Makefile
873installdirs: installdirs-recursive
874installdirs-am:
875install: install-recursive
876install-exec: install-exec-recursive
877install-data: install-data-recursive
878uninstall: uninstall-recursive
879
880install-am: all-am
881        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
882
883installcheck: installcheck-recursive
884install-strip:
885        if test -z '$(STRIP)'; then \
886          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
887            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
888              install; \
889        else \
890          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
891            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
892            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
893        fi
894mostlyclean-generic:
895
896clean-generic:
897
898distclean-generic:
899        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
900        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
901        -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
902
903maintainer-clean-generic:
904        @echo "This command is intended for maintainers to use"
905        @echo "it deletes files that may require special tools to rebuild."
906clean: clean-recursive
907
908clean-am: clean-generic clean-libtool mostlyclean-am
909
910distclean: distclean-recursive
911        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
912        -rm -f Makefile
913distclean-am: clean-am distclean-generic distclean-hdr \
914        distclean-libtool distclean-tags
915
916dvi: dvi-recursive
917
918dvi-am:
919
920html: html-recursive
921
922html-am:
923
924info: info-recursive
925
926info-am:
927
928install-data-am:
929
930install-dvi: install-dvi-recursive
931
932install-dvi-am:
933
934install-exec-am:
935
936install-html: install-html-recursive
937
938install-html-am:
939
940install-info: install-info-recursive
941
942install-info-am:
943
944install-man:
945
946install-pdf: install-pdf-recursive
947
948install-pdf-am:
949
950install-ps: install-ps-recursive
951
952install-ps-am:
953
954installcheck-am:
955
956maintainer-clean: maintainer-clean-recursive
957        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
958        -rm -rf $(top_srcdir)/autom4te.cache
959        -rm -f Makefile
960maintainer-clean-am: distclean-am maintainer-clean-generic
961
962mostlyclean: mostlyclean-recursive
963
964mostlyclean-am: mostlyclean-generic mostlyclean-libtool
965
966pdf: pdf-recursive
967
968pdf-am:
969
970ps: ps-recursive
971
972ps-am:
973
974uninstall-am:
975
976.MAKE: $(am__recursive_targets) install-am install-strip
977
978.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
979        am--refresh check check-am clean clean-cscope clean-generic \
980        clean-libtool cscope cscopelist-am ctags ctags-am dist \
981        dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
982        dist-tarZ dist-xz dist-zip distcheck distclean \
983        distclean-generic distclean-hdr distclean-libtool \
984        distclean-tags distcleancheck distdir distuninstallcheck dvi \
985        dvi-am html html-am info info-am install install-am \
986        install-data install-data-am install-dvi install-dvi-am \
987        install-exec install-exec-am install-html install-html-am \
988        install-info install-info-am install-man install-pdf \
989        install-pdf-am install-ps install-ps-am install-strip \
990        installcheck installcheck-am installdirs installdirs-am \
991        maintainer-clean maintainer-clean-generic mostlyclean \
992        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
993        tags tags-am uninstall uninstall-am
994
995.PRECIOUS: Makefile
996
997
998dist-hook:
999        @ for subdir in include; do \
1000          if test "$$subdir" = .; then :; else \
1001            test -d $(distdir)/$$subdir \
1002            || mkdir $(distdir)/$$subdir \
1003            || exit 1; \
1004            cp -p $(srcdir)/$$subdir/*.h  $(distdir)/$$subdir \
1005              || exit 1; \
1006            rm -f $(distdir)/$$subdir/autoconf.h; \
1007          fi; \
1008        done
1009
1010install-pinger:
1011        chown root $(DESTDIR)$(DEFAULT_PINGER)
1012        chmod 4711 $(DESTDIR)$(DEFAULT_PINGER)
1013
1014check: have-cppunit check-recursive
1015
1016have-cppunit:
1017        @if test "$(SQUID_CPPUNIT_INC)$(SQUID_CPPUNIT_LA)$(SQUID_CPPUNIT_LIBS)" = "" ; then \
1018                echo "FATAL: 'make check' requires cppunit and cppunit development packages. They do not appear to be installed." ; \
1019                exit 1 ; \
1020        fi
1021
1022.PHONY: have-cppunit
1023
1024# Tell versions [3.59,3.63) of GNU make to not export all variables.
1025# Otherwise a system limit (for SysV at least) may be exceeded.
1026.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.