source: yaz/trunk/fuentes/Makefile.in @ 265

Last change on this file since 265 was 265, checked in by mabarracus, 4 years ago

Add new source code 5.15.2

File size: 29.7 KB
Line 
1# Makefile.in generated by automake 1.14.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
19am__make_running_with_option = \
20  case $${target_option-} in \
21      ?) ;; \
22      *) echo "am__make_running_with_option: internal error: invalid" \
23              "target option '$${target_option-}' specified" >&2; \
24         exit 1;; \
25  esac; \
26  has_opt=no; \
27  sane_makeflags=$$MAKEFLAGS; \
28  if $(am__is_gnu_make); then \
29    sane_makeflags=$$MFLAGS; \
30  else \
31    case $$MAKEFLAGS in \
32      *\\[\ \   ]*) \
33        bs=\\; \
34        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
35          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
36    esac; \
37  fi; \
38  skip_next=no; \
39  strip_trailopt () \
40  { \
41    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
42  }; \
43  for flg in $$sane_makeflags; do \
44    test $$skip_next = yes && { skip_next=no; continue; }; \
45    case $$flg in \
46      *=*|--*) continue;; \
47        -*I) strip_trailopt 'I'; skip_next=yes;; \
48      -*I?*) strip_trailopt 'I';; \
49        -*O) strip_trailopt 'O'; skip_next=yes;; \
50      -*O?*) strip_trailopt 'O';; \
51        -*l) strip_trailopt 'l'; skip_next=yes;; \
52      -*l?*) strip_trailopt 'l';; \
53      -[dEDm]) skip_next=yes;; \
54      -[JT]) skip_next=yes;; \
55    esac; \
56    case $$flg in \
57      *$$target_option*) has_opt=yes; break;; \
58    esac; \
59  done; \
60  test $$has_opt = yes
61am__make_dryrun = (target_option=n; $(am__make_running_with_option))
62am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
63pkgdatadir = $(datadir)/@PACKAGE@
64pkgincludedir = $(includedir)/@PACKAGE@
65pkglibdir = $(libdir)/@PACKAGE@
66pkglibexecdir = $(libexecdir)/@PACKAGE@
67am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68install_sh_DATA = $(install_sh) -c -m 644
69install_sh_PROGRAM = $(install_sh) -c
70install_sh_SCRIPT = $(install_sh) -c
71INSTALL_HEADER = $(INSTALL_DATA)
72transform = $(program_transform_name)
73NORMAL_INSTALL = :
74PRE_INSTALL = :
75POST_INSTALL = :
76NORMAL_UNINSTALL = :
77PRE_UNINSTALL = :
78POST_UNINSTALL = :
79build_triplet = @build@
80host_triplet = @host@
81subdir = .
82DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
83        $(top_srcdir)/configure $(am__configure_deps) \
84        $(srcdir)/yaz-config.in $(srcdir)/yaz.pc.in \
85        $(srcdir)/Doxyfile.in $(top_srcdir)/win/version.nsi.in \
86        ChangeLog NEWS config/compile config/config.guess \
87        config/config.sub config/depcomp config/install-sh \
88        config/missing config/ylwrap config/ltmain.sh \
89        $(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
90        $(top_srcdir)/config/config.sub \
91        $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
92        $(top_srcdir)/config/missing
93ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
94am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_icu.m4 \
95        $(top_srcdir)/m4/acx_pthread.m4 $(top_srcdir)/m4/libtool.m4 \
96        $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
97        $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
98        $(top_srcdir)/m4/yaz.m4 $(top_srcdir)/m4/yaz_libxml2.m4 \
99        $(top_srcdir)/configure.ac
100am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
101        $(ACLOCAL_M4)
102am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
103 configure.lineno config.status.lineno
104mkinstalldirs = $(install_sh) -d
105CONFIG_HEADER = $(top_builddir)/include/config.h
106CONFIG_CLEAN_FILES = yaz-config yaz.pc Doxyfile win/version.nsi
107CONFIG_CLEAN_VPATH_FILES =
108AM_V_P = $(am__v_P_@AM_V@)
109am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
110am__v_P_0 = false
111am__v_P_1 = :
112AM_V_GEN = $(am__v_GEN_@AM_V@)
113am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
114am__v_GEN_0 = @echo "  GEN     " $@;
115am__v_GEN_1 =
116AM_V_at = $(am__v_at_@AM_V@)
117am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
118am__v_at_0 = @
119am__v_at_1 =
120SOURCES =
121DIST_SOURCES =
122RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
123        ctags-recursive dvi-recursive html-recursive info-recursive \
124        install-data-recursive install-dvi-recursive \
125        install-exec-recursive install-html-recursive \
126        install-info-recursive install-pdf-recursive \
127        install-ps-recursive install-recursive installcheck-recursive \
128        installdirs-recursive pdf-recursive ps-recursive \
129        tags-recursive uninstall-recursive
130am__can_run_installinfo = \
131  case $$AM_UPDATE_INFO_DIR in \
132    n|no|NO) false;; \
133    *) (install-info --version) >/dev/null 2>&1;; \
134  esac
135am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
136am__vpath_adj = case $$p in \
137    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
138    *) f=$$p;; \
139  esac;
140am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
141am__install_max = 40
142am__nobase_strip_setup = \
143  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
144am__nobase_strip = \
145  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
146am__nobase_list = $(am__nobase_strip_setup); \
147  for p in $$list; do echo "$$p $$p"; done | \
148  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
149  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
150    if (++n[$$2] == $(am__install_max)) \
151      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
152    END { for (dir in files) print dir, files[dir] }'
153am__base_list = \
154  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
155  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
156am__uninstall_files_from_dir = { \
157  test -z "$$files" \
158    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
159    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
160         $(am__cd) "$$dir" && rm -f $$files; }; \
161  }
162am__installdirs = "$(DESTDIR)$(aclocaldir)" \
163        "$(DESTDIR)$(pkgconfigdir)"
164DATA = $(aclocal_DATA) $(pkgconfig_DATA)
165RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
166  distclean-recursive maintainer-clean-recursive
167am__recursive_targets = \
168  $(RECURSIVE_TARGETS) \
169  $(RECURSIVE_CLEAN_TARGETS) \
170  $(am__extra_recursive_targets)
171AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
172        cscope distdir dist dist-all distcheck
173am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
174# Read a list of newline-separated strings from the standard input,
175# and print each of them once, without duplicates.  Input order is
176# *not* preserved.
177am__uniquify_input = $(AWK) '\
178  BEGIN { nonempty = 0; } \
179  { items[$$0] = 1; nonempty = 1; } \
180  END { if (nonempty) { for (i in items) print i; }; } \
181'
182# Make sure the list of sources is unique.  This is necessary because,
183# e.g., the same source file might be shared among _SOURCES variables
184# for different programs/libraries.
185am__define_uniq_tagged_files = \
186  list='$(am__tagged_files)'; \
187  unique=`for i in $$list; do \
188    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
189  done | $(am__uniquify_input)`
190ETAGS = etags
191CTAGS = ctags
192CSCOPE = cscope
193DIST_SUBDIRS = $(SUBDIRS)
194DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
195distdir = $(PACKAGE)-$(VERSION)
196top_distdir = $(distdir)
197am__remove_distdir = \
198  if test -d "$(distdir)"; then \
199    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
200      && rm -rf "$(distdir)" \
201      || { sleep 5 && rm -rf "$(distdir)"; }; \
202  else :; fi
203am__post_remove_distdir = $(am__remove_distdir)
204am__relativize = \
205  dir0=`pwd`; \
206  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
207  sed_rest='s,^[^/]*/*,,'; \
208  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
209  sed_butlast='s,/*[^/]*$$,,'; \
210  while test -n "$$dir1"; do \
211    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
212    if test "$$first" != "."; then \
213      if test "$$first" = ".."; then \
214        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
215        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
216      else \
217        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
218        if test "$$first2" = "$$first"; then \
219          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
220        else \
221          dir2="../$$dir2"; \
222        fi; \
223        dir0="$$dir0"/"$$first"; \
224      fi; \
225    fi; \
226    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
227  done; \
228  reldir="$$dir2"
229DIST_ARCHIVES = $(distdir).tar.gz
230GZIP_ENV = --best
231DIST_TARGETS = dist-gzip
232distuninstallcheck_listfiles = find . -type f -print
233am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
234  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
235distcleancheck_listfiles = find . -type f -print
236ACLOCAL = @ACLOCAL@
237AMTAR = @AMTAR@
238AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
239AR = @AR@
240AUTOCONF = @AUTOCONF@
241AUTOHEADER = @AUTOHEADER@
242AUTOMAKE = @AUTOMAKE@
243AWK = @AWK@
244CC = @CC@
245CCDEPMODE = @CCDEPMODE@
246CFLAGS = @CFLAGS@
247CPP = @CPP@
248CPPFLAGS = @CPPFLAGS@
249CYGPATH_W = @CYGPATH_W@
250DEFS = @DEFS@
251DEPDIR = @DEPDIR@
252DLLTOOL = @DLLTOOL@
253DSSSL_DIR = @DSSSL_DIR@
254DSYMUTIL = @DSYMUTIL@
255DTD_DIR = @DTD_DIR@
256DUMPBIN = @DUMPBIN@
257ECHO_C = @ECHO_C@
258ECHO_N = @ECHO_N@
259ECHO_T = @ECHO_T@
260EGREP = @EGREP@
261EXEEXT = @EXEEXT@
262FGREP = @FGREP@
263GREP = @GREP@
264HIREDIS_LIBS = @HIREDIS_LIBS@
265HTML_COMPILE = @HTML_COMPILE@
266ICU_CFLAGS = @ICU_CFLAGS@
267ICU_CONFIG = @ICU_CONFIG@
268ICU_CPPFLAGS = @ICU_CPPFLAGS@
269ICU_CXXFLAGS = @ICU_CXXFLAGS@
270ICU_LIBS = @ICU_LIBS@
271INSTALL = @INSTALL@
272INSTALL_DATA = @INSTALL_DATA@
273INSTALL_PROGRAM = @INSTALL_PROGRAM@
274INSTALL_SCRIPT = @INSTALL_SCRIPT@
275INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
276LD = @LD@
277LDFLAGS = @LDFLAGS@
278LIBOBJS = @LIBOBJS@
279LIBS = @LIBS@
280LIBTOOL = @LIBTOOL@
281LIPO = @LIPO@
282LN_S = @LN_S@
283LTLIBOBJS = @LTLIBOBJS@
284MAKEINFO = @MAKEINFO@
285MANIFEST_TOOL = @MANIFEST_TOOL@
286MAN_COMPILE = @MAN_COMPILE@
287MEMCACHED_LIBS = @MEMCACHED_LIBS@
288MKDIR_P = @MKDIR_P@
289NM = @NM@
290NMEDIT = @NMEDIT@
291OBJDUMP = @OBJDUMP@
292OBJEXT = @OBJEXT@
293OTOOL = @OTOOL@
294OTOOL64 = @OTOOL64@
295PACKAGE = @PACKAGE@
296PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
297PACKAGE_NAME = @PACKAGE_NAME@
298PACKAGE_STRING = @PACKAGE_STRING@
299PACKAGE_TARNAME = @PACKAGE_TARNAME@
300PACKAGE_URL = @PACKAGE_URL@
301PACKAGE_VERSION = @PACKAGE_VERSION@
302PATH_SEPARATOR = @PATH_SEPARATOR@
303PDF_COMPILE = @PDF_COMPILE@
304PTHREAD_CC = @PTHREAD_CC@
305PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
306PTHREAD_LIBS = @PTHREAD_LIBS@
307RANLIB = @RANLIB@
308READLINE_LIBS = @READLINE_LIBS@
309SED = @SED@
310SET_MAKE = @SET_MAKE@
311SHELL = @SHELL@
312SSL_CFLAGS = @SSL_CFLAGS@
313SSL_LIBS = @SSL_LIBS@
314STRIP = @STRIP@
315TCLSH = @TCLSH@
316TCPD_LIBS = @TCPD_LIBS@
317TKL_COMPILE = @TKL_COMPILE@
318VERSION = @VERSION@
319VERSION_HEX = @VERSION_HEX@
320VERSION_SHA1 = @VERSION_SHA1@
321WIN_FILEVERSION = @WIN_FILEVERSION@
322XML2_CFLAGS = @XML2_CFLAGS@
323XSLTPROC_COMPILE = @XSLTPROC_COMPILE@
324XSL_DIR = @XSL_DIR@
325YACC = @YACC@
326YAZ_CONFIG_CFLAGS = @YAZ_CONFIG_CFLAGS@
327YAZ_CONF_CFLAGS = @YAZ_CONF_CFLAGS@
328abs_builddir = @abs_builddir@
329abs_srcdir = @abs_srcdir@
330abs_top_builddir = @abs_top_builddir@
331abs_top_srcdir = @abs_top_srcdir@
332ac_ct_AR = @ac_ct_AR@
333ac_ct_CC = @ac_ct_CC@
334ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
335acx_pthread_config = @acx_pthread_config@
336am__include = @am__include@
337am__leading_dot = @am__leading_dot@
338am__quote = @am__quote@
339am__tar = @am__tar@
340am__untar = @am__untar@
341bindir = @bindir@
342build = @build@
343build_alias = @build_alias@
344build_cpu = @build_cpu@
345build_os = @build_os@
346build_vendor = @build_vendor@
347builddir = @builddir@
348datadir = @datadir@
349datarootdir = @datarootdir@
350docdir = @docdir@
351dvidir = @dvidir@
352exec_prefix = @exec_prefix@
353host = @host@
354host_alias = @host_alias@
355host_cpu = @host_cpu@
356host_os = @host_os@
357host_vendor = @host_vendor@
358htmldir = @htmldir@
359includedir = @includedir@
360infodir = @infodir@
361install_sh = @install_sh@
362libdir = @libdir@
363libexecdir = @libexecdir@
364localedir = @localedir@
365localstatedir = @localstatedir@
366mandir = @mandir@
367mkdir_p = @mkdir_p@
368oldincludedir = @oldincludedir@
369pdfdir = @pdfdir@
370pkgconfigpath = @pkgconfigpath@
371prefix = @prefix@
372program_transform_name = @program_transform_name@
373psdir = @psdir@
374sbindir = @sbindir@
375sharedstatedir = @sharedstatedir@
376srcdir = @srcdir@
377sysconfdir = @sysconfdir@
378target_alias = @target_alias@
379top_build_prefix = @top_build_prefix@
380top_builddir = @top_builddir@
381top_srcdir = @top_srcdir@
382AUTOMAKE_OPTIONS = foreign
383ACLOCAL_AMFLAGS = -I m4
384SUBDIRS = src include util test client ztest zoom doc etc
385aclocaldir = $(datadir)/aclocal
386aclocal_DATA = m4/yaz.m4
387pkgconfigdir = $(libdir)/pkgconfig
388pkgconfig_DATA = yaz.pc
389SPEC_FILE = $(PACKAGE).spec
390EXTRA_DIST = $(SPEC_FILE) IDMETA README.md LICENSE NEWS m4/id-config.sh \
391        yaz-config.in yaz.pc.in m4/yaz.m4 m4/yaz_libxml2.m4 buildconf.sh \
392        Doxyfile.in m4/acx_pthread.m4 m4/ac_check_icu.m4
393
394all: all-recursive
395
396.SUFFIXES:
397am--refresh: Makefile
398        @:
399$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
400        @for dep in $?; do \
401          case '$(am__configure_deps)' in \
402            *$$dep*) \
403              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
404              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
405                && exit 0; \
406              exit 1;; \
407          esac; \
408        done; \
409        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
410        $(am__cd) $(top_srcdir) && \
411          $(AUTOMAKE) --foreign Makefile
412.PRECIOUS: Makefile
413Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
414        @case '$?' in \
415          *config.status*) \
416            echo ' $(SHELL) ./config.status'; \
417            $(SHELL) ./config.status;; \
418          *) \
419            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
420            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
421        esac;
422
423$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
424        $(SHELL) ./config.status --recheck
425
426$(top_srcdir)/configure:  $(am__configure_deps)
427        $(am__cd) $(srcdir) && $(AUTOCONF)
428$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
429        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
430$(am__aclocal_m4_deps):
431yaz-config: $(top_builddir)/config.status $(srcdir)/yaz-config.in
432        cd $(top_builddir) && $(SHELL) ./config.status $@
433yaz.pc: $(top_builddir)/config.status $(srcdir)/yaz.pc.in
434        cd $(top_builddir) && $(SHELL) ./config.status $@
435Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
436        cd $(top_builddir) && $(SHELL) ./config.status $@
437win/version.nsi: $(top_builddir)/config.status $(top_srcdir)/win/version.nsi.in
438        cd $(top_builddir) && $(SHELL) ./config.status $@
439
440mostlyclean-libtool:
441        -rm -f *.lo
442
443clean-libtool:
444        -rm -rf .libs _libs
445
446distclean-libtool:
447        -rm -f libtool config.lt
448install-aclocalDATA: $(aclocal_DATA)
449        @$(NORMAL_INSTALL)
450        @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
451        if test -n "$$list"; then \
452          echo " $(MKDIR_P) '$(DESTDIR)$(aclocaldir)'"; \
453          $(MKDIR_P) "$(DESTDIR)$(aclocaldir)" || exit 1; \
454        fi; \
455        for p in $$list; do \
456          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
457          echo "$$d$$p"; \
458        done | $(am__base_list) | \
459        while read files; do \
460          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
461          $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
462        done
463
464uninstall-aclocalDATA:
465        @$(NORMAL_UNINSTALL)
466        @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
467        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
468        dir='$(DESTDIR)$(aclocaldir)'; $(am__uninstall_files_from_dir)
469install-pkgconfigDATA: $(pkgconfig_DATA)
470        @$(NORMAL_INSTALL)
471        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
472        if test -n "$$list"; then \
473          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
474          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
475        fi; \
476        for p in $$list; do \
477          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
478          echo "$$d$$p"; \
479        done | $(am__base_list) | \
480        while read files; do \
481          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
482          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
483        done
484
485uninstall-pkgconfigDATA:
486        @$(NORMAL_UNINSTALL)
487        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
488        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
489        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
490
491# This directory's subdirectories are mostly independent; you can cd
492# into them and run 'make' without going through this Makefile.
493# To change the values of 'make' variables: instead of editing Makefiles,
494# (1) if the variable is set in 'config.status', edit 'config.status'
495#     (which will cause the Makefiles to be regenerated when you run 'make');
496# (2) otherwise, pass the desired values on the 'make' command line.
497$(am__recursive_targets):
498        @fail=; \
499        if $(am__make_keepgoing); then \
500          failcom='fail=yes'; \
501        else \
502          failcom='exit 1'; \
503        fi; \
504        dot_seen=no; \
505        target=`echo $@ | sed s/-recursive//`; \
506        case "$@" in \
507          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
508          *) list='$(SUBDIRS)' ;; \
509        esac; \
510        for subdir in $$list; do \
511          echo "Making $$target in $$subdir"; \
512          if test "$$subdir" = "."; then \
513            dot_seen=yes; \
514            local_target="$$target-am"; \
515          else \
516            local_target="$$target"; \
517          fi; \
518          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
519          || eval $$failcom; \
520        done; \
521        if test "$$dot_seen" = "no"; then \
522          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
523        fi; test -z "$$fail"
524
525ID: $(am__tagged_files)
526        $(am__define_uniq_tagged_files); mkid -fID $$unique
527tags: tags-recursive
528TAGS: tags
529
530tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
531        set x; \
532        here=`pwd`; \
533        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
534          include_option=--etags-include; \
535          empty_fix=.; \
536        else \
537          include_option=--include; \
538          empty_fix=; \
539        fi; \
540        list='$(SUBDIRS)'; for subdir in $$list; do \
541          if test "$$subdir" = .; then :; else \
542            test ! -f $$subdir/TAGS || \
543              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
544          fi; \
545        done; \
546        $(am__define_uniq_tagged_files); \
547        shift; \
548        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
549          test -n "$$unique" || unique=$$empty_fix; \
550          if test $$# -gt 0; then \
551            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
552              "$$@" $$unique; \
553          else \
554            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
555              $$unique; \
556          fi; \
557        fi
558ctags: ctags-recursive
559
560CTAGS: ctags
561ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
562        $(am__define_uniq_tagged_files); \
563        test -z "$(CTAGS_ARGS)$$unique" \
564          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
565             $$unique
566
567GTAGS:
568        here=`$(am__cd) $(top_builddir) && pwd` \
569          && $(am__cd) $(top_srcdir) \
570          && gtags -i $(GTAGS_ARGS) "$$here"
571cscope: cscope.files
572        test ! -s cscope.files \
573          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
574clean-cscope:
575        -rm -f cscope.files
576cscope.files: clean-cscope cscopelist
577cscopelist: cscopelist-recursive
578
579cscopelist-am: $(am__tagged_files)
580        list='$(am__tagged_files)'; \
581        case "$(srcdir)" in \
582          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
583          *) sdir=$(subdir)/$(srcdir) ;; \
584        esac; \
585        for i in $$list; do \
586          if test -f "$$i"; then \
587            echo "$(subdir)/$$i"; \
588          else \
589            echo "$$sdir/$$i"; \
590          fi; \
591        done >> $(top_builddir)/cscope.files
592
593distclean-tags:
594        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
595        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
596
597distdir: $(DISTFILES)
598        $(am__remove_distdir)
599        test -d "$(distdir)" || mkdir "$(distdir)"
600        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
601        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
602        list='$(DISTFILES)'; \
603          dist_files=`for file in $$list; do echo $$file; done | \
604          sed -e "s|^$$srcdirstrip/||;t" \
605              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
606        case $$dist_files in \
607          */*) $(MKDIR_P) `echo "$$dist_files" | \
608                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
609                           sort -u` ;; \
610        esac; \
611        for file in $$dist_files; do \
612          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
613          if test -d $$d/$$file; then \
614            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
615            if test -d "$(distdir)/$$file"; then \
616              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
617            fi; \
618            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
619              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
620              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
621            fi; \
622            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
623          else \
624            test -f "$(distdir)/$$file" \
625            || cp -p $$d/$$file "$(distdir)/$$file" \
626            || exit 1; \
627          fi; \
628        done
629        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
630          if test "$$subdir" = .; then :; else \
631            $(am__make_dryrun) \
632              || test -d "$(distdir)/$$subdir" \
633              || $(MKDIR_P) "$(distdir)/$$subdir" \
634              || exit 1; \
635            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
636            $(am__relativize); \
637            new_distdir=$$reldir; \
638            dir1=$$subdir; dir2="$(top_distdir)"; \
639            $(am__relativize); \
640            new_top_distdir=$$reldir; \
641            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
642            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
643            ($(am__cd) $$subdir && \
644              $(MAKE) $(AM_MAKEFLAGS) \
645                top_distdir="$$new_top_distdir" \
646                distdir="$$new_distdir" \
647                am__remove_distdir=: \
648                am__skip_length_check=: \
649                am__skip_mode_fix=: \
650                distdir) \
651              || exit 1; \
652          fi; \
653        done
654        $(MAKE) $(AM_MAKEFLAGS) \
655          top_distdir="$(top_distdir)" distdir="$(distdir)" \
656          dist-hook
657        -test -n "$(am__skip_mode_fix)" \
658        || find "$(distdir)" -type d ! -perm -755 \
659                -exec chmod u+rwx,go+rx {} \; -o \
660          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
661          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
662          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
663        || chmod -R a+r "$(distdir)"
664dist-gzip: distdir
665        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
666        $(am__post_remove_distdir)
667
668dist-bzip2: distdir
669        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
670        $(am__post_remove_distdir)
671
672dist-lzip: distdir
673        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
674        $(am__post_remove_distdir)
675
676dist-xz: distdir
677        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
678        $(am__post_remove_distdir)
679
680dist-tarZ: distdir
681        @echo WARNING: "Support for shar distribution archives is" \
682                       "deprecated." >&2
683        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
684        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
685        $(am__post_remove_distdir)
686
687dist-shar: distdir
688        @echo WARNING: "Support for distribution archives compressed with" \
689                       "legacy program 'compress' is deprecated." >&2
690        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
691        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
692        $(am__post_remove_distdir)
693
694dist-zip: distdir
695        -rm -f $(distdir).zip
696        zip -rq $(distdir).zip $(distdir)
697        $(am__post_remove_distdir)
698
699dist dist-all:
700        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
701        $(am__post_remove_distdir)
702
703# This target untars the dist file and tries a VPATH configuration.  Then
704# it guarantees that the distribution is self-contained by making another
705# tarfile.
706distcheck: dist
707        case '$(DIST_ARCHIVES)' in \
708        *.tar.gz*) \
709          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
710        *.tar.bz2*) \
711          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
712        *.tar.lz*) \
713          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
714        *.tar.xz*) \
715          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
716        *.tar.Z*) \
717          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
718        *.shar.gz*) \
719          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
720        *.zip*) \
721          unzip $(distdir).zip ;;\
722        esac
723        chmod -R a-w $(distdir)
724        chmod u+w $(distdir)
725        mkdir $(distdir)/_build $(distdir)/_inst
726        chmod a-w $(distdir)
727        test -d $(distdir)/_build || exit 0; \
728        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
729          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
730          && am__cwd=`pwd` \
731          && $(am__cd) $(distdir)/_build \
732          && ../configure \
733            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
734            $(DISTCHECK_CONFIGURE_FLAGS) \
735            --srcdir=.. --prefix="$$dc_install_base" \
736          && $(MAKE) $(AM_MAKEFLAGS) \
737          && $(MAKE) $(AM_MAKEFLAGS) dvi \
738          && $(MAKE) $(AM_MAKEFLAGS) check \
739          && $(MAKE) $(AM_MAKEFLAGS) install \
740          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
741          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
742          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
743                distuninstallcheck \
744          && chmod -R a-w "$$dc_install_base" \
745          && ({ \
746               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
747               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
748               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
749               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
750                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
751              } || { rm -rf "$$dc_destdir"; exit 1; }) \
752          && rm -rf "$$dc_destdir" \
753          && $(MAKE) $(AM_MAKEFLAGS) dist \
754          && rm -rf $(DIST_ARCHIVES) \
755          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
756          && cd "$$am__cwd" \
757          || exit 1
758        $(am__post_remove_distdir)
759        @(echo "$(distdir) archives ready for distribution: "; \
760          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
761          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
762distuninstallcheck:
763        @test -n '$(distuninstallcheck_dir)' || { \
764          echo 'ERROR: trying to run $@ with an empty' \
765               '$$(distuninstallcheck_dir)' >&2; \
766          exit 1; \
767        }; \
768        $(am__cd) '$(distuninstallcheck_dir)' || { \
769          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
770          exit 1; \
771        }; \
772        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
773           || { echo "ERROR: files left after uninstall:" ; \
774                if test -n "$(DESTDIR)"; then \
775                  echo "  (check DESTDIR support)"; \
776                fi ; \
777                $(distuninstallcheck_listfiles) ; \
778                exit 1; } >&2
779distcleancheck: distclean
780        @if test '$(srcdir)' = . ; then \
781          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
782          exit 1 ; \
783        fi
784        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
785          || { echo "ERROR: files left in build directory after distclean:" ; \
786               $(distcleancheck_listfiles) ; \
787               exit 1; } >&2
788check-am: all-am
789check: check-recursive
790all-am: Makefile $(DATA)
791installdirs: installdirs-recursive
792installdirs-am:
793        for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(pkgconfigdir)"; do \
794          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
795        done
796install: install-recursive
797install-exec: install-exec-recursive
798install-data: install-data-recursive
799uninstall: uninstall-recursive
800
801install-am: all-am
802        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
803
804installcheck: installcheck-recursive
805install-strip:
806        if test -z '$(STRIP)'; then \
807          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
808            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
809              install; \
810        else \
811          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
812            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
813            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
814        fi
815mostlyclean-generic:
816
817clean-generic:
818
819distclean-generic:
820        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
821        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
822
823maintainer-clean-generic:
824        @echo "This command is intended for maintainers to use"
825        @echo "it deletes files that may require special tools to rebuild."
826clean: clean-recursive
827
828clean-am: clean-generic clean-libtool mostlyclean-am
829
830distclean: distclean-recursive
831        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
832        -rm -f Makefile
833distclean-am: clean-am distclean-generic distclean-libtool \
834        distclean-tags
835
836dvi: dvi-recursive
837
838dvi-am:
839
840html: html-recursive
841
842html-am:
843
844info: info-recursive
845
846info-am:
847
848install-data-am: install-aclocalDATA install-pkgconfigDATA
849
850install-dvi: install-dvi-recursive
851
852install-dvi-am:
853
854install-exec-am:
855
856install-html: install-html-recursive
857
858install-html-am:
859
860install-info: install-info-recursive
861
862install-info-am:
863
864install-man:
865
866install-pdf: install-pdf-recursive
867
868install-pdf-am:
869
870install-ps: install-ps-recursive
871
872install-ps-am:
873
874installcheck-am:
875
876maintainer-clean: maintainer-clean-recursive
877        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
878        -rm -rf $(top_srcdir)/autom4te.cache
879        -rm -f Makefile
880maintainer-clean-am: distclean-am maintainer-clean-generic
881
882mostlyclean: mostlyclean-recursive
883
884mostlyclean-am: mostlyclean-generic mostlyclean-libtool
885
886pdf: pdf-recursive
887
888pdf-am:
889
890ps: ps-recursive
891
892ps-am:
893
894uninstall-am: uninstall-aclocalDATA uninstall-pkgconfigDATA
895
896.MAKE: $(am__recursive_targets) install-am install-strip
897
898.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
899        am--refresh check check-am clean clean-cscope clean-generic \
900        clean-libtool cscope cscopelist-am ctags ctags-am dist \
901        dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
902        dist-tarZ dist-xz dist-zip distcheck distclean \
903        distclean-generic distclean-libtool distclean-tags \
904        distcleancheck distdir distuninstallcheck dvi dvi-am html \
905        html-am info info-am install install-aclocalDATA install-am \
906        install-data install-data-am install-dvi install-dvi-am \
907        install-exec install-exec-am install-html install-html-am \
908        install-info install-info-am install-man install-pdf \
909        install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
910        install-strip installcheck installcheck-am installdirs \
911        installdirs-am maintainer-clean maintainer-clean-generic \
912        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
913        ps ps-am tags tags-am uninstall uninstall-aclocalDATA \
914        uninstall-am uninstall-pkgconfigDATA
915
916
917dist-hook:
918        if test -x /usr/bin/git -a -d .git; then git log >ChangeLog ; cp ChangeLog $(distdir); fi
919        test -d $(distdir)/win || mkdir $(distdir)/win
920        -cp $(srcdir)/win/* $(distdir)/win
921
922.PHONY:debian
923debian:
924        dpkg-buildpackage -rfakeroot
925
926# Tell versions [3.59,3.63) of GNU make to not export all variables.
927# Otherwise a system limit (for SysV at least) may be exceeded.
928.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.