source: yaz/trunk/fuentes/Makefile.in @ 272

Last change on this file since 272 was 272, checked in by mabarracus, 5 years ago

Add generated automake files from compilation

File size: 29.9 KB
Line 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \   ]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91subdir = .
92ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
93am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_icu.m4 \
94        $(top_srcdir)/m4/acx_pthread.m4 $(top_srcdir)/m4/libtool.m4 \
95        $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
96        $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
97        $(top_srcdir)/m4/yaz.m4 $(top_srcdir)/m4/yaz_libxml2.m4 \
98        $(top_srcdir)/configure.ac
99am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
100        $(ACLOCAL_M4)
101DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
102        $(am__configure_deps) $(am__DIST_COMMON)
103am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
104 configure.lineno config.status.lineno
105mkinstalldirs = $(install_sh) -d
106CONFIG_HEADER = $(top_builddir)/include/config.h
107CONFIG_CLEAN_FILES = yaz-config yaz.pc Doxyfile win/version.nsi
108CONFIG_CLEAN_VPATH_FILES =
109AM_V_P = $(am__v_P_@AM_V@)
110am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
111am__v_P_0 = false
112am__v_P_1 = :
113AM_V_GEN = $(am__v_GEN_@AM_V@)
114am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
115am__v_GEN_0 = @echo "  GEN     " $@;
116am__v_GEN_1 =
117AM_V_at = $(am__v_at_@AM_V@)
118am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
119am__v_at_0 = @
120am__v_at_1 =
121SOURCES =
122DIST_SOURCES =
123RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
124        ctags-recursive dvi-recursive html-recursive info-recursive \
125        install-data-recursive install-dvi-recursive \
126        install-exec-recursive install-html-recursive \
127        install-info-recursive install-pdf-recursive \
128        install-ps-recursive install-recursive installcheck-recursive \
129        installdirs-recursive pdf-recursive ps-recursive \
130        tags-recursive uninstall-recursive
131am__can_run_installinfo = \
132  case $$AM_UPDATE_INFO_DIR in \
133    n|no|NO) false;; \
134    *) (install-info --version) >/dev/null 2>&1;; \
135  esac
136am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
137am__vpath_adj = case $$p in \
138    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
139    *) f=$$p;; \
140  esac;
141am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
142am__install_max = 40
143am__nobase_strip_setup = \
144  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
145am__nobase_strip = \
146  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
147am__nobase_list = $(am__nobase_strip_setup); \
148  for p in $$list; do echo "$$p $$p"; done | \
149  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
150  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
151    if (++n[$$2] == $(am__install_max)) \
152      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
153    END { for (dir in files) print dir, files[dir] }'
154am__base_list = \
155  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
156  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
157am__uninstall_files_from_dir = { \
158  test -z "$$files" \
159    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
160    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
161         $(am__cd) "$$dir" && rm -f $$files; }; \
162  }
163am__installdirs = "$(DESTDIR)$(aclocaldir)" \
164        "$(DESTDIR)$(pkgconfigdir)"
165DATA = $(aclocal_DATA) $(pkgconfig_DATA)
166RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
167  distclean-recursive maintainer-clean-recursive
168am__recursive_targets = \
169  $(RECURSIVE_TARGETS) \
170  $(RECURSIVE_CLEAN_TARGETS) \
171  $(am__extra_recursive_targets)
172AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
173        cscope distdir dist dist-all distcheck
174am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
175# Read a list of newline-separated strings from the standard input,
176# and print each of them once, without duplicates.  Input order is
177# *not* preserved.
178am__uniquify_input = $(AWK) '\
179  BEGIN { nonempty = 0; } \
180  { items[$$0] = 1; nonempty = 1; } \
181  END { if (nonempty) { for (i in items) print i; }; } \
182'
183# Make sure the list of sources is unique.  This is necessary because,
184# e.g., the same source file might be shared among _SOURCES variables
185# for different programs/libraries.
186am__define_uniq_tagged_files = \
187  list='$(am__tagged_files)'; \
188  unique=`for i in $$list; do \
189    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
190  done | $(am__uniquify_input)`
191ETAGS = etags
192CTAGS = ctags
193CSCOPE = cscope
194DIST_SUBDIRS = $(SUBDIRS)
195am__DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.in \
196        $(srcdir)/yaz-config.in $(srcdir)/yaz.pc.in \
197        $(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
198        $(top_srcdir)/config/config.sub \
199        $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
200        $(top_srcdir)/config/missing $(top_srcdir)/win/version.nsi.in \
201        ChangeLog NEWS config/compile config/config.guess \
202        config/config.sub config/depcomp config/install-sh \
203        config/ltmain.sh config/missing config/ylwrap
204DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
205distdir = $(PACKAGE)-$(VERSION)
206top_distdir = $(distdir)
207am__remove_distdir = \
208  if test -d "$(distdir)"; then \
209    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
210      && rm -rf "$(distdir)" \
211      || { sleep 5 && rm -rf "$(distdir)"; }; \
212  else :; fi
213am__post_remove_distdir = $(am__remove_distdir)
214am__relativize = \
215  dir0=`pwd`; \
216  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
217  sed_rest='s,^[^/]*/*,,'; \
218  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
219  sed_butlast='s,/*[^/]*$$,,'; \
220  while test -n "$$dir1"; do \
221    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
222    if test "$$first" != "."; then \
223      if test "$$first" = ".."; then \
224        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
225        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
226      else \
227        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
228        if test "$$first2" = "$$first"; then \
229          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
230        else \
231          dir2="../$$dir2"; \
232        fi; \
233        dir0="$$dir0"/"$$first"; \
234      fi; \
235    fi; \
236    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
237  done; \
238  reldir="$$dir2"
239DIST_ARCHIVES = $(distdir).tar.gz
240GZIP_ENV = --best
241DIST_TARGETS = dist-gzip
242distuninstallcheck_listfiles = find . -type f -print
243am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
244  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
245distcleancheck_listfiles = find . -type f -print
246ACLOCAL = @ACLOCAL@
247AMTAR = @AMTAR@
248AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
249AR = @AR@
250AUTOCONF = @AUTOCONF@
251AUTOHEADER = @AUTOHEADER@
252AUTOMAKE = @AUTOMAKE@
253AWK = @AWK@
254CC = @CC@
255CCDEPMODE = @CCDEPMODE@
256CFLAGS = @CFLAGS@
257CPP = @CPP@
258CPPFLAGS = @CPPFLAGS@
259CYGPATH_W = @CYGPATH_W@
260DEFS = @DEFS@
261DEPDIR = @DEPDIR@
262DLLTOOL = @DLLTOOL@
263DSSSL_DIR = @DSSSL_DIR@
264DSYMUTIL = @DSYMUTIL@
265DTD_DIR = @DTD_DIR@
266DUMPBIN = @DUMPBIN@
267ECHO_C = @ECHO_C@
268ECHO_N = @ECHO_N@
269ECHO_T = @ECHO_T@
270EGREP = @EGREP@
271EXEEXT = @EXEEXT@
272FGREP = @FGREP@
273GREP = @GREP@
274HIREDIS_LIBS = @HIREDIS_LIBS@
275HTML_COMPILE = @HTML_COMPILE@
276ICU_CFLAGS = @ICU_CFLAGS@
277ICU_CONFIG = @ICU_CONFIG@
278ICU_CPPFLAGS = @ICU_CPPFLAGS@
279ICU_CXXFLAGS = @ICU_CXXFLAGS@
280ICU_LIBS = @ICU_LIBS@
281INSTALL = @INSTALL@
282INSTALL_DATA = @INSTALL_DATA@
283INSTALL_PROGRAM = @INSTALL_PROGRAM@
284INSTALL_SCRIPT = @INSTALL_SCRIPT@
285INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
286LD = @LD@
287LDFLAGS = @LDFLAGS@
288LIBOBJS = @LIBOBJS@
289LIBS = @LIBS@
290LIBTOOL = @LIBTOOL@
291LIPO = @LIPO@
292LN_S = @LN_S@
293LTLIBOBJS = @LTLIBOBJS@
294MAKEINFO = @MAKEINFO@
295MANIFEST_TOOL = @MANIFEST_TOOL@
296MAN_COMPILE = @MAN_COMPILE@
297MEMCACHED_LIBS = @MEMCACHED_LIBS@
298MKDIR_P = @MKDIR_P@
299NM = @NM@
300NMEDIT = @NMEDIT@
301OBJDUMP = @OBJDUMP@
302OBJEXT = @OBJEXT@
303OTOOL = @OTOOL@
304OTOOL64 = @OTOOL64@
305PACKAGE = @PACKAGE@
306PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
307PACKAGE_NAME = @PACKAGE_NAME@
308PACKAGE_STRING = @PACKAGE_STRING@
309PACKAGE_TARNAME = @PACKAGE_TARNAME@
310PACKAGE_URL = @PACKAGE_URL@
311PACKAGE_VERSION = @PACKAGE_VERSION@
312PATH_SEPARATOR = @PATH_SEPARATOR@
313PDF_COMPILE = @PDF_COMPILE@
314PTHREAD_CC = @PTHREAD_CC@
315PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
316PTHREAD_LIBS = @PTHREAD_LIBS@
317RANLIB = @RANLIB@
318READLINE_LIBS = @READLINE_LIBS@
319SED = @SED@
320SET_MAKE = @SET_MAKE@
321SHELL = @SHELL@
322SSL_CFLAGS = @SSL_CFLAGS@
323SSL_LIBS = @SSL_LIBS@
324STRIP = @STRIP@
325TCLSH = @TCLSH@
326TCPD_LIBS = @TCPD_LIBS@
327TKL_COMPILE = @TKL_COMPILE@
328VERSION = @VERSION@
329VERSION_HEX = @VERSION_HEX@
330VERSION_SHA1 = @VERSION_SHA1@
331WIN_FILEVERSION = @WIN_FILEVERSION@
332XML2_CFLAGS = @XML2_CFLAGS@
333XSLTPROC_COMPILE = @XSLTPROC_COMPILE@
334XSL_DIR = @XSL_DIR@
335YACC = @YACC@
336YAZ_CONFIG_CFLAGS = @YAZ_CONFIG_CFLAGS@
337YAZ_CONF_CFLAGS = @YAZ_CONF_CFLAGS@
338abs_builddir = @abs_builddir@
339abs_srcdir = @abs_srcdir@
340abs_top_builddir = @abs_top_builddir@
341abs_top_srcdir = @abs_top_srcdir@
342ac_ct_AR = @ac_ct_AR@
343ac_ct_CC = @ac_ct_CC@
344ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
345acx_pthread_config = @acx_pthread_config@
346am__include = @am__include@
347am__leading_dot = @am__leading_dot@
348am__quote = @am__quote@
349am__tar = @am__tar@
350am__untar = @am__untar@
351bindir = @bindir@
352build = @build@
353build_alias = @build_alias@
354build_cpu = @build_cpu@
355build_os = @build_os@
356build_vendor = @build_vendor@
357builddir = @builddir@
358datadir = @datadir@
359datarootdir = @datarootdir@
360docdir = @docdir@
361dvidir = @dvidir@
362exec_prefix = @exec_prefix@
363host = @host@
364host_alias = @host_alias@
365host_cpu = @host_cpu@
366host_os = @host_os@
367host_vendor = @host_vendor@
368htmldir = @htmldir@
369includedir = @includedir@
370infodir = @infodir@
371install_sh = @install_sh@
372libdir = @libdir@
373libexecdir = @libexecdir@
374localedir = @localedir@
375localstatedir = @localstatedir@
376mandir = @mandir@
377mkdir_p = @mkdir_p@
378oldincludedir = @oldincludedir@
379pdfdir = @pdfdir@
380pkgconfigpath = @pkgconfigpath@
381prefix = @prefix@
382program_transform_name = @program_transform_name@
383psdir = @psdir@
384runstatedir = @runstatedir@
385sbindir = @sbindir@
386sharedstatedir = @sharedstatedir@
387srcdir = @srcdir@
388sysconfdir = @sysconfdir@
389target_alias = @target_alias@
390top_build_prefix = @top_build_prefix@
391top_builddir = @top_builddir@
392top_srcdir = @top_srcdir@
393AUTOMAKE_OPTIONS = foreign
394ACLOCAL_AMFLAGS = -I m4
395SUBDIRS = src include util test client ztest zoom doc etc
396aclocaldir = $(datadir)/aclocal
397aclocal_DATA = m4/yaz.m4
398pkgconfigdir = $(libdir)/pkgconfig
399pkgconfig_DATA = yaz.pc
400SPEC_FILE = $(PACKAGE).spec
401EXTRA_DIST = $(SPEC_FILE) IDMETA README.md LICENSE NEWS m4/id-config.sh \
402        yaz-config.in yaz.pc.in m4/yaz.m4 m4/yaz_libxml2.m4 buildconf.sh \
403        Doxyfile.in m4/acx_pthread.m4 m4/ac_check_icu.m4
404
405all: all-recursive
406
407.SUFFIXES:
408am--refresh: Makefile
409        @:
410$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
411        @for dep in $?; do \
412          case '$(am__configure_deps)' in \
413            *$$dep*) \
414              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
415              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
416                && exit 0; \
417              exit 1;; \
418          esac; \
419        done; \
420        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
421        $(am__cd) $(top_srcdir) && \
422          $(AUTOMAKE) --foreign Makefile
423Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
424        @case '$?' in \
425          *config.status*) \
426            echo ' $(SHELL) ./config.status'; \
427            $(SHELL) ./config.status;; \
428          *) \
429            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
430            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
431        esac;
432
433$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
434        $(SHELL) ./config.status --recheck
435
436$(top_srcdir)/configure:  $(am__configure_deps)
437        $(am__cd) $(srcdir) && $(AUTOCONF)
438$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
439        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
440$(am__aclocal_m4_deps):
441yaz-config: $(top_builddir)/config.status $(srcdir)/yaz-config.in
442        cd $(top_builddir) && $(SHELL) ./config.status $@
443yaz.pc: $(top_builddir)/config.status $(srcdir)/yaz.pc.in
444        cd $(top_builddir) && $(SHELL) ./config.status $@
445Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
446        cd $(top_builddir) && $(SHELL) ./config.status $@
447win/version.nsi: $(top_builddir)/config.status $(top_srcdir)/win/version.nsi.in
448        cd $(top_builddir) && $(SHELL) ./config.status $@
449
450mostlyclean-libtool:
451        -rm -f *.lo
452
453clean-libtool:
454        -rm -rf .libs _libs
455
456distclean-libtool:
457        -rm -f libtool config.lt
458install-aclocalDATA: $(aclocal_DATA)
459        @$(NORMAL_INSTALL)
460        @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
461        if test -n "$$list"; then \
462          echo " $(MKDIR_P) '$(DESTDIR)$(aclocaldir)'"; \
463          $(MKDIR_P) "$(DESTDIR)$(aclocaldir)" || exit 1; \
464        fi; \
465        for p in $$list; do \
466          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
467          echo "$$d$$p"; \
468        done | $(am__base_list) | \
469        while read files; do \
470          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
471          $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
472        done
473
474uninstall-aclocalDATA:
475        @$(NORMAL_UNINSTALL)
476        @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
477        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
478        dir='$(DESTDIR)$(aclocaldir)'; $(am__uninstall_files_from_dir)
479install-pkgconfigDATA: $(pkgconfig_DATA)
480        @$(NORMAL_INSTALL)
481        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
482        if test -n "$$list"; then \
483          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
484          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
485        fi; \
486        for p in $$list; do \
487          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
488          echo "$$d$$p"; \
489        done | $(am__base_list) | \
490        while read files; do \
491          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
492          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
493        done
494
495uninstall-pkgconfigDATA:
496        @$(NORMAL_UNINSTALL)
497        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
498        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
499        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
500
501# This directory's subdirectories are mostly independent; you can cd
502# into them and run 'make' without going through this Makefile.
503# To change the values of 'make' variables: instead of editing Makefiles,
504# (1) if the variable is set in 'config.status', edit 'config.status'
505#     (which will cause the Makefiles to be regenerated when you run 'make');
506# (2) otherwise, pass the desired values on the 'make' command line.
507$(am__recursive_targets):
508        @fail=; \
509        if $(am__make_keepgoing); then \
510          failcom='fail=yes'; \
511        else \
512          failcom='exit 1'; \
513        fi; \
514        dot_seen=no; \
515        target=`echo $@ | sed s/-recursive//`; \
516        case "$@" in \
517          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
518          *) list='$(SUBDIRS)' ;; \
519        esac; \
520        for subdir in $$list; do \
521          echo "Making $$target in $$subdir"; \
522          if test "$$subdir" = "."; then \
523            dot_seen=yes; \
524            local_target="$$target-am"; \
525          else \
526            local_target="$$target"; \
527          fi; \
528          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
529          || eval $$failcom; \
530        done; \
531        if test "$$dot_seen" = "no"; then \
532          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
533        fi; test -z "$$fail"
534
535ID: $(am__tagged_files)
536        $(am__define_uniq_tagged_files); mkid -fID $$unique
537tags: tags-recursive
538TAGS: tags
539
540tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
541        set x; \
542        here=`pwd`; \
543        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
544          include_option=--etags-include; \
545          empty_fix=.; \
546        else \
547          include_option=--include; \
548          empty_fix=; \
549        fi; \
550        list='$(SUBDIRS)'; for subdir in $$list; do \
551          if test "$$subdir" = .; then :; else \
552            test ! -f $$subdir/TAGS || \
553              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
554          fi; \
555        done; \
556        $(am__define_uniq_tagged_files); \
557        shift; \
558        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
559          test -n "$$unique" || unique=$$empty_fix; \
560          if test $$# -gt 0; then \
561            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
562              "$$@" $$unique; \
563          else \
564            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
565              $$unique; \
566          fi; \
567        fi
568ctags: ctags-recursive
569
570CTAGS: ctags
571ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
572        $(am__define_uniq_tagged_files); \
573        test -z "$(CTAGS_ARGS)$$unique" \
574          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
575             $$unique
576
577GTAGS:
578        here=`$(am__cd) $(top_builddir) && pwd` \
579          && $(am__cd) $(top_srcdir) \
580          && gtags -i $(GTAGS_ARGS) "$$here"
581cscope: cscope.files
582        test ! -s cscope.files \
583          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
584clean-cscope:
585        -rm -f cscope.files
586cscope.files: clean-cscope cscopelist
587cscopelist: cscopelist-recursive
588
589cscopelist-am: $(am__tagged_files)
590        list='$(am__tagged_files)'; \
591        case "$(srcdir)" in \
592          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
593          *) sdir=$(subdir)/$(srcdir) ;; \
594        esac; \
595        for i in $$list; do \
596          if test -f "$$i"; then \
597            echo "$(subdir)/$$i"; \
598          else \
599            echo "$$sdir/$$i"; \
600          fi; \
601        done >> $(top_builddir)/cscope.files
602
603distclean-tags:
604        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
605        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
606
607distdir: $(DISTFILES)
608        $(am__remove_distdir)
609        test -d "$(distdir)" || mkdir "$(distdir)"
610        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
611        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
612        list='$(DISTFILES)'; \
613          dist_files=`for file in $$list; do echo $$file; done | \
614          sed -e "s|^$$srcdirstrip/||;t" \
615              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
616        case $$dist_files in \
617          */*) $(MKDIR_P) `echo "$$dist_files" | \
618                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
619                           sort -u` ;; \
620        esac; \
621        for file in $$dist_files; do \
622          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
623          if test -d $$d/$$file; then \
624            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
625            if test -d "$(distdir)/$$file"; then \
626              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
627            fi; \
628            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
629              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
630              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
631            fi; \
632            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
633          else \
634            test -f "$(distdir)/$$file" \
635            || cp -p $$d/$$file "$(distdir)/$$file" \
636            || exit 1; \
637          fi; \
638        done
639        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
640          if test "$$subdir" = .; then :; else \
641            $(am__make_dryrun) \
642              || test -d "$(distdir)/$$subdir" \
643              || $(MKDIR_P) "$(distdir)/$$subdir" \
644              || exit 1; \
645            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
646            $(am__relativize); \
647            new_distdir=$$reldir; \
648            dir1=$$subdir; dir2="$(top_distdir)"; \
649            $(am__relativize); \
650            new_top_distdir=$$reldir; \
651            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
652            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
653            ($(am__cd) $$subdir && \
654              $(MAKE) $(AM_MAKEFLAGS) \
655                top_distdir="$$new_top_distdir" \
656                distdir="$$new_distdir" \
657                am__remove_distdir=: \
658                am__skip_length_check=: \
659                am__skip_mode_fix=: \
660                distdir) \
661              || exit 1; \
662          fi; \
663        done
664        $(MAKE) $(AM_MAKEFLAGS) \
665          top_distdir="$(top_distdir)" distdir="$(distdir)" \
666          dist-hook
667        -test -n "$(am__skip_mode_fix)" \
668        || find "$(distdir)" -type d ! -perm -755 \
669                -exec chmod u+rwx,go+rx {} \; -o \
670          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
671          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
672          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
673        || chmod -R a+r "$(distdir)"
674dist-gzip: distdir
675        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
676        $(am__post_remove_distdir)
677
678dist-bzip2: distdir
679        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
680        $(am__post_remove_distdir)
681
682dist-lzip: distdir
683        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
684        $(am__post_remove_distdir)
685
686dist-xz: distdir
687        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
688        $(am__post_remove_distdir)
689
690dist-tarZ: distdir
691        @echo WARNING: "Support for distribution archives compressed with" \
692                       "legacy program 'compress' is deprecated." >&2
693        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
694        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
695        $(am__post_remove_distdir)
696
697dist-shar: distdir
698        @echo WARNING: "Support for shar distribution archives is" \
699                       "deprecated." >&2
700        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
701        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
702        $(am__post_remove_distdir)
703
704dist-zip: distdir
705        -rm -f $(distdir).zip
706        zip -rq $(distdir).zip $(distdir)
707        $(am__post_remove_distdir)
708
709dist dist-all:
710        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
711        $(am__post_remove_distdir)
712
713# This target untars the dist file and tries a VPATH configuration.  Then
714# it guarantees that the distribution is self-contained by making another
715# tarfile.
716distcheck: dist
717        case '$(DIST_ARCHIVES)' in \
718        *.tar.gz*) \
719          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
720        *.tar.bz2*) \
721          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
722        *.tar.lz*) \
723          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
724        *.tar.xz*) \
725          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
726        *.tar.Z*) \
727          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
728        *.shar.gz*) \
729          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
730        *.zip*) \
731          unzip $(distdir).zip ;;\
732        esac
733        chmod -R a-w $(distdir)
734        chmod u+w $(distdir)
735        mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
736        chmod a-w $(distdir)
737        test -d $(distdir)/_build || exit 0; \
738        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
739          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
740          && am__cwd=`pwd` \
741          && $(am__cd) $(distdir)/_build/sub \
742          && ../../configure \
743            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
744            $(DISTCHECK_CONFIGURE_FLAGS) \
745            --srcdir=../.. --prefix="$$dc_install_base" \
746          && $(MAKE) $(AM_MAKEFLAGS) \
747          && $(MAKE) $(AM_MAKEFLAGS) dvi \
748          && $(MAKE) $(AM_MAKEFLAGS) check \
749          && $(MAKE) $(AM_MAKEFLAGS) install \
750          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
751          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
752          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
753                distuninstallcheck \
754          && chmod -R a-w "$$dc_install_base" \
755          && ({ \
756               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
757               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
758               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
759               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
760                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
761              } || { rm -rf "$$dc_destdir"; exit 1; }) \
762          && rm -rf "$$dc_destdir" \
763          && $(MAKE) $(AM_MAKEFLAGS) dist \
764          && rm -rf $(DIST_ARCHIVES) \
765          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
766          && cd "$$am__cwd" \
767          || exit 1
768        $(am__post_remove_distdir)
769        @(echo "$(distdir) archives ready for distribution: "; \
770          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
771          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
772distuninstallcheck:
773        @test -n '$(distuninstallcheck_dir)' || { \
774          echo 'ERROR: trying to run $@ with an empty' \
775               '$$(distuninstallcheck_dir)' >&2; \
776          exit 1; \
777        }; \
778        $(am__cd) '$(distuninstallcheck_dir)' || { \
779          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
780          exit 1; \
781        }; \
782        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
783           || { echo "ERROR: files left after uninstall:" ; \
784                if test -n "$(DESTDIR)"; then \
785                  echo "  (check DESTDIR support)"; \
786                fi ; \
787                $(distuninstallcheck_listfiles) ; \
788                exit 1; } >&2
789distcleancheck: distclean
790        @if test '$(srcdir)' = . ; then \
791          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
792          exit 1 ; \
793        fi
794        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
795          || { echo "ERROR: files left in build directory after distclean:" ; \
796               $(distcleancheck_listfiles) ; \
797               exit 1; } >&2
798check-am: all-am
799check: check-recursive
800all-am: Makefile $(DATA)
801installdirs: installdirs-recursive
802installdirs-am:
803        for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(pkgconfigdir)"; do \
804          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
805        done
806install: install-recursive
807install-exec: install-exec-recursive
808install-data: install-data-recursive
809uninstall: uninstall-recursive
810
811install-am: all-am
812        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
813
814installcheck: installcheck-recursive
815install-strip:
816        if test -z '$(STRIP)'; then \
817          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
818            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
819              install; \
820        else \
821          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
822            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
823            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
824        fi
825mostlyclean-generic:
826
827clean-generic:
828
829distclean-generic:
830        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
831        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
832
833maintainer-clean-generic:
834        @echo "This command is intended for maintainers to use"
835        @echo "it deletes files that may require special tools to rebuild."
836clean: clean-recursive
837
838clean-am: clean-generic clean-libtool mostlyclean-am
839
840distclean: distclean-recursive
841        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
842        -rm -f Makefile
843distclean-am: clean-am distclean-generic distclean-libtool \
844        distclean-tags
845
846dvi: dvi-recursive
847
848dvi-am:
849
850html: html-recursive
851
852html-am:
853
854info: info-recursive
855
856info-am:
857
858install-data-am: install-aclocalDATA install-pkgconfigDATA
859
860install-dvi: install-dvi-recursive
861
862install-dvi-am:
863
864install-exec-am:
865
866install-html: install-html-recursive
867
868install-html-am:
869
870install-info: install-info-recursive
871
872install-info-am:
873
874install-man:
875
876install-pdf: install-pdf-recursive
877
878install-pdf-am:
879
880install-ps: install-ps-recursive
881
882install-ps-am:
883
884installcheck-am:
885
886maintainer-clean: maintainer-clean-recursive
887        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
888        -rm -rf $(top_srcdir)/autom4te.cache
889        -rm -f Makefile
890maintainer-clean-am: distclean-am maintainer-clean-generic
891
892mostlyclean: mostlyclean-recursive
893
894mostlyclean-am: mostlyclean-generic mostlyclean-libtool
895
896pdf: pdf-recursive
897
898pdf-am:
899
900ps: ps-recursive
901
902ps-am:
903
904uninstall-am: uninstall-aclocalDATA uninstall-pkgconfigDATA
905
906.MAKE: $(am__recursive_targets) install-am install-strip
907
908.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
909        am--refresh check check-am clean clean-cscope clean-generic \
910        clean-libtool cscope cscopelist-am ctags ctags-am dist \
911        dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
912        dist-tarZ dist-xz dist-zip distcheck distclean \
913        distclean-generic distclean-libtool distclean-tags \
914        distcleancheck distdir distuninstallcheck dvi dvi-am html \
915        html-am info info-am install install-aclocalDATA install-am \
916        install-data install-data-am install-dvi install-dvi-am \
917        install-exec install-exec-am install-html install-html-am \
918        install-info install-info-am install-man install-pdf \
919        install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
920        install-strip installcheck installcheck-am installdirs \
921        installdirs-am maintainer-clean maintainer-clean-generic \
922        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
923        ps ps-am tags tags-am uninstall uninstall-aclocalDATA \
924        uninstall-am uninstall-pkgconfigDATA
925
926.PRECIOUS: Makefile
927
928
929dist-hook:
930        if test -x /usr/bin/git -a -d .git; then git log >ChangeLog ; cp ChangeLog $(distdir); fi
931        test -d $(distdir)/win || mkdir $(distdir)/win
932        -cp $(srcdir)/win/* $(distdir)/win
933
934.PHONY:debian
935debian:
936        dpkg-buildpackage -rfakeroot
937
938# Tell versions [3.59,3.63) of GNU make to not export all variables.
939# Otherwise a system limit (for SysV at least) may be exceeded.
940.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.