source: yaz/trunk/fuentes/Makefile.in @ 273

Last change on this file since 273 was 273, checked in by mabarracus, 5 years ago

Fixed clean

File size: 29.9 KB
Line 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \   ]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91subdir = .
92ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
93am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_icu.m4 \
94        $(top_srcdir)/m4/acx_pthread.m4 $(top_srcdir)/m4/libtool.m4 \
95        $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
96        $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
97        $(top_srcdir)/m4/yaz.m4 $(top_srcdir)/m4/yaz_libxml2.m4 \
98        $(top_srcdir)/configure.ac
99am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
100        $(ACLOCAL_M4)
101DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
102        $(am__configure_deps) $(am__DIST_COMMON)
103am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
104 configure.lineno config.status.lineno
105mkinstalldirs = $(install_sh) -d
106CONFIG_HEADER = $(top_builddir)/include/config.h
107CONFIG_CLEAN_FILES = yaz-config yaz.pc Doxyfile
108#win/version.nsi
109CONFIG_CLEAN_VPATH_FILES =
110AM_V_P = $(am__v_P_@AM_V@)
111am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
112am__v_P_0 = false
113am__v_P_1 = :
114AM_V_GEN = $(am__v_GEN_@AM_V@)
115am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
116am__v_GEN_0 = @echo "  GEN     " $@;
117am__v_GEN_1 =
118AM_V_at = $(am__v_at_@AM_V@)
119am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
120am__v_at_0 = @
121am__v_at_1 =
122SOURCES =
123DIST_SOURCES =
124RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
125        ctags-recursive dvi-recursive html-recursive info-recursive \
126        install-data-recursive install-dvi-recursive \
127        install-exec-recursive install-html-recursive \
128        install-info-recursive install-pdf-recursive \
129        install-ps-recursive install-recursive installcheck-recursive \
130        installdirs-recursive pdf-recursive ps-recursive \
131        tags-recursive uninstall-recursive
132am__can_run_installinfo = \
133  case $$AM_UPDATE_INFO_DIR in \
134    n|no|NO) false;; \
135    *) (install-info --version) >/dev/null 2>&1;; \
136  esac
137am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
138am__vpath_adj = case $$p in \
139    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
140    *) f=$$p;; \
141  esac;
142am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
143am__install_max = 40
144am__nobase_strip_setup = \
145  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
146am__nobase_strip = \
147  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
148am__nobase_list = $(am__nobase_strip_setup); \
149  for p in $$list; do echo "$$p $$p"; done | \
150  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
151  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
152    if (++n[$$2] == $(am__install_max)) \
153      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
154    END { for (dir in files) print dir, files[dir] }'
155am__base_list = \
156  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
157  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
158am__uninstall_files_from_dir = { \
159  test -z "$$files" \
160    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
161    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
162         $(am__cd) "$$dir" && rm -f $$files; }; \
163  }
164am__installdirs = "$(DESTDIR)$(aclocaldir)" \
165        "$(DESTDIR)$(pkgconfigdir)"
166DATA = $(aclocal_DATA) $(pkgconfig_DATA)
167RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
168  distclean-recursive maintainer-clean-recursive
169am__recursive_targets = \
170  $(RECURSIVE_TARGETS) \
171  $(RECURSIVE_CLEAN_TARGETS) \
172  $(am__extra_recursive_targets)
173AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
174        cscope distdir dist dist-all distcheck
175am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
176# Read a list of newline-separated strings from the standard input,
177# and print each of them once, without duplicates.  Input order is
178# *not* preserved.
179am__uniquify_input = $(AWK) '\
180  BEGIN { nonempty = 0; } \
181  { items[$$0] = 1; nonempty = 1; } \
182  END { if (nonempty) { for (i in items) print i; }; } \
183'
184# Make sure the list of sources is unique.  This is necessary because,
185# e.g., the same source file might be shared among _SOURCES variables
186# for different programs/libraries.
187am__define_uniq_tagged_files = \
188  list='$(am__tagged_files)'; \
189  unique=`for i in $$list; do \
190    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
191  done | $(am__uniquify_input)`
192ETAGS = etags
193CTAGS = ctags
194CSCOPE = cscope
195DIST_SUBDIRS = $(SUBDIRS)
196am__DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.in \
197        $(srcdir)/yaz-config.in $(srcdir)/yaz.pc.in \
198        $(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
199        $(top_srcdir)/config/config.sub \
200        $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
201        $(top_srcdir)/config/missing $(top_srcdir)/win/version.nsi.in \
202        ChangeLog NEWS config/compile config/config.guess \
203        config/config.sub config/depcomp config/install-sh \
204        config/ltmain.sh config/missing config/ylwrap
205DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
206distdir = $(PACKAGE)-$(VERSION)
207top_distdir = $(distdir)
208am__remove_distdir = \
209  if test -d "$(distdir)"; then \
210    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
211      && rm -rf "$(distdir)" \
212      || { sleep 5 && rm -rf "$(distdir)"; }; \
213  else :; fi
214am__post_remove_distdir = $(am__remove_distdir)
215am__relativize = \
216  dir0=`pwd`; \
217  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
218  sed_rest='s,^[^/]*/*,,'; \
219  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
220  sed_butlast='s,/*[^/]*$$,,'; \
221  while test -n "$$dir1"; do \
222    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
223    if test "$$first" != "."; then \
224      if test "$$first" = ".."; then \
225        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
226        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
227      else \
228        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
229        if test "$$first2" = "$$first"; then \
230          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
231        else \
232          dir2="../$$dir2"; \
233        fi; \
234        dir0="$$dir0"/"$$first"; \
235      fi; \
236    fi; \
237    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
238  done; \
239  reldir="$$dir2"
240DIST_ARCHIVES = $(distdir).tar.gz
241GZIP_ENV = --best
242DIST_TARGETS = dist-gzip
243distuninstallcheck_listfiles = find . -type f -print
244am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
245  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
246distcleancheck_listfiles = find . -type f -print
247ACLOCAL = @ACLOCAL@
248AMTAR = @AMTAR@
249AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
250AR = @AR@
251AUTOCONF = @AUTOCONF@
252AUTOHEADER = @AUTOHEADER@
253AUTOMAKE = @AUTOMAKE@
254AWK = @AWK@
255CC = @CC@
256CCDEPMODE = @CCDEPMODE@
257CFLAGS = @CFLAGS@
258CPP = @CPP@
259CPPFLAGS = @CPPFLAGS@
260CYGPATH_W = @CYGPATH_W@
261DEFS = @DEFS@
262DEPDIR = @DEPDIR@
263DLLTOOL = @DLLTOOL@
264DSSSL_DIR = @DSSSL_DIR@
265DSYMUTIL = @DSYMUTIL@
266DTD_DIR = @DTD_DIR@
267DUMPBIN = @DUMPBIN@
268ECHO_C = @ECHO_C@
269ECHO_N = @ECHO_N@
270ECHO_T = @ECHO_T@
271EGREP = @EGREP@
272EXEEXT = @EXEEXT@
273FGREP = @FGREP@
274GREP = @GREP@
275HIREDIS_LIBS = @HIREDIS_LIBS@
276HTML_COMPILE = @HTML_COMPILE@
277ICU_CFLAGS = @ICU_CFLAGS@
278ICU_CONFIG = @ICU_CONFIG@
279ICU_CPPFLAGS = @ICU_CPPFLAGS@
280ICU_CXXFLAGS = @ICU_CXXFLAGS@
281ICU_LIBS = @ICU_LIBS@
282INSTALL = @INSTALL@
283INSTALL_DATA = @INSTALL_DATA@
284INSTALL_PROGRAM = @INSTALL_PROGRAM@
285INSTALL_SCRIPT = @INSTALL_SCRIPT@
286INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
287LD = @LD@
288LDFLAGS = @LDFLAGS@
289LIBOBJS = @LIBOBJS@
290LIBS = @LIBS@
291LIBTOOL = @LIBTOOL@
292LIPO = @LIPO@
293LN_S = @LN_S@
294LTLIBOBJS = @LTLIBOBJS@
295MAKEINFO = @MAKEINFO@
296MANIFEST_TOOL = @MANIFEST_TOOL@
297MAN_COMPILE = @MAN_COMPILE@
298MEMCACHED_LIBS = @MEMCACHED_LIBS@
299MKDIR_P = @MKDIR_P@
300NM = @NM@
301NMEDIT = @NMEDIT@
302OBJDUMP = @OBJDUMP@
303OBJEXT = @OBJEXT@
304OTOOL = @OTOOL@
305OTOOL64 = @OTOOL64@
306PACKAGE = @PACKAGE@
307PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
308PACKAGE_NAME = @PACKAGE_NAME@
309PACKAGE_STRING = @PACKAGE_STRING@
310PACKAGE_TARNAME = @PACKAGE_TARNAME@
311PACKAGE_URL = @PACKAGE_URL@
312PACKAGE_VERSION = @PACKAGE_VERSION@
313PATH_SEPARATOR = @PATH_SEPARATOR@
314PDF_COMPILE = @PDF_COMPILE@
315PTHREAD_CC = @PTHREAD_CC@
316PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
317PTHREAD_LIBS = @PTHREAD_LIBS@
318RANLIB = @RANLIB@
319READLINE_LIBS = @READLINE_LIBS@
320SED = @SED@
321SET_MAKE = @SET_MAKE@
322SHELL = @SHELL@
323SSL_CFLAGS = @SSL_CFLAGS@
324SSL_LIBS = @SSL_LIBS@
325STRIP = @STRIP@
326TCLSH = @TCLSH@
327TCPD_LIBS = @TCPD_LIBS@
328TKL_COMPILE = @TKL_COMPILE@
329VERSION = @VERSION@
330VERSION_HEX = @VERSION_HEX@
331VERSION_SHA1 = @VERSION_SHA1@
332WIN_FILEVERSION = @WIN_FILEVERSION@
333XML2_CFLAGS = @XML2_CFLAGS@
334XSLTPROC_COMPILE = @XSLTPROC_COMPILE@
335XSL_DIR = @XSL_DIR@
336YACC = @YACC@
337YAZ_CONFIG_CFLAGS = @YAZ_CONFIG_CFLAGS@
338YAZ_CONF_CFLAGS = @YAZ_CONF_CFLAGS@
339abs_builddir = @abs_builddir@
340abs_srcdir = @abs_srcdir@
341abs_top_builddir = @abs_top_builddir@
342abs_top_srcdir = @abs_top_srcdir@
343ac_ct_AR = @ac_ct_AR@
344ac_ct_CC = @ac_ct_CC@
345ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
346acx_pthread_config = @acx_pthread_config@
347am__include = @am__include@
348am__leading_dot = @am__leading_dot@
349am__quote = @am__quote@
350am__tar = @am__tar@
351am__untar = @am__untar@
352bindir = @bindir@
353build = @build@
354build_alias = @build_alias@
355build_cpu = @build_cpu@
356build_os = @build_os@
357build_vendor = @build_vendor@
358builddir = @builddir@
359datadir = @datadir@
360datarootdir = @datarootdir@
361docdir = @docdir@
362dvidir = @dvidir@
363exec_prefix = @exec_prefix@
364host = @host@
365host_alias = @host_alias@
366host_cpu = @host_cpu@
367host_os = @host_os@
368host_vendor = @host_vendor@
369htmldir = @htmldir@
370includedir = @includedir@
371infodir = @infodir@
372install_sh = @install_sh@
373libdir = @libdir@
374libexecdir = @libexecdir@
375localedir = @localedir@
376localstatedir = @localstatedir@
377mandir = @mandir@
378mkdir_p = @mkdir_p@
379oldincludedir = @oldincludedir@
380pdfdir = @pdfdir@
381pkgconfigpath = @pkgconfigpath@
382prefix = @prefix@
383program_transform_name = @program_transform_name@
384psdir = @psdir@
385runstatedir = @runstatedir@
386sbindir = @sbindir@
387sharedstatedir = @sharedstatedir@
388srcdir = @srcdir@
389sysconfdir = @sysconfdir@
390target_alias = @target_alias@
391top_build_prefix = @top_build_prefix@
392top_builddir = @top_builddir@
393top_srcdir = @top_srcdir@
394AUTOMAKE_OPTIONS = foreign
395ACLOCAL_AMFLAGS = -I m4
396SUBDIRS = src include util test client ztest zoom doc etc
397aclocaldir = $(datadir)/aclocal
398aclocal_DATA = m4/yaz.m4
399pkgconfigdir = $(libdir)/pkgconfig
400pkgconfig_DATA = yaz.pc
401SPEC_FILE = $(PACKAGE).spec
402EXTRA_DIST = $(SPEC_FILE) IDMETA README.md LICENSE NEWS m4/id-config.sh \
403        yaz-config.in yaz.pc.in m4/yaz.m4 m4/yaz_libxml2.m4 buildconf.sh \
404        Doxyfile.in m4/acx_pthread.m4 m4/ac_check_icu.m4
405
406all: all-recursive
407
408.SUFFIXES:
409am--refresh: Makefile
410        @:
411$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
412        @for dep in $?; do \
413          case '$(am__configure_deps)' in \
414            *$$dep*) \
415              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
416              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
417                && exit 0; \
418              exit 1;; \
419          esac; \
420        done; \
421        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
422        $(am__cd) $(top_srcdir) && \
423          $(AUTOMAKE) --foreign Makefile
424Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
425        @case '$?' in \
426          *config.status*) \
427            echo ' $(SHELL) ./config.status'; \
428            $(SHELL) ./config.status;; \
429          *) \
430            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
431            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
432        esac;
433
434$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
435        $(SHELL) ./config.status --recheck
436
437$(top_srcdir)/configure:  $(am__configure_deps)
438        $(am__cd) $(srcdir) && $(AUTOCONF)
439$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
440        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
441$(am__aclocal_m4_deps):
442yaz-config: $(top_builddir)/config.status $(srcdir)/yaz-config.in
443        cd $(top_builddir) && $(SHELL) ./config.status $@
444yaz.pc: $(top_builddir)/config.status $(srcdir)/yaz.pc.in
445        cd $(top_builddir) && $(SHELL) ./config.status $@
446Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
447        cd $(top_builddir) && $(SHELL) ./config.status $@
448win/version.nsi: $(top_builddir)/config.status $(top_srcdir)/win/version.nsi.in
449        cd $(top_builddir) && $(SHELL) ./config.status $@
450
451mostlyclean-libtool:
452        -rm -f *.lo
453
454clean-libtool:
455        -rm -rf .libs _libs
456
457distclean-libtool:
458        -rm -f libtool config.lt
459install-aclocalDATA: $(aclocal_DATA)
460        @$(NORMAL_INSTALL)
461        @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
462        if test -n "$$list"; then \
463          echo " $(MKDIR_P) '$(DESTDIR)$(aclocaldir)'"; \
464          $(MKDIR_P) "$(DESTDIR)$(aclocaldir)" || exit 1; \
465        fi; \
466        for p in $$list; do \
467          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
468          echo "$$d$$p"; \
469        done | $(am__base_list) | \
470        while read files; do \
471          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
472          $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
473        done
474
475uninstall-aclocalDATA:
476        @$(NORMAL_UNINSTALL)
477        @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
478        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
479        dir='$(DESTDIR)$(aclocaldir)'; $(am__uninstall_files_from_dir)
480install-pkgconfigDATA: $(pkgconfig_DATA)
481        @$(NORMAL_INSTALL)
482        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
483        if test -n "$$list"; then \
484          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
485          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
486        fi; \
487        for p in $$list; do \
488          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
489          echo "$$d$$p"; \
490        done | $(am__base_list) | \
491        while read files; do \
492          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
493          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
494        done
495
496uninstall-pkgconfigDATA:
497        @$(NORMAL_UNINSTALL)
498        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
499        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
500        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
501
502# This directory's subdirectories are mostly independent; you can cd
503# into them and run 'make' without going through this Makefile.
504# To change the values of 'make' variables: instead of editing Makefiles,
505# (1) if the variable is set in 'config.status', edit 'config.status'
506#     (which will cause the Makefiles to be regenerated when you run 'make');
507# (2) otherwise, pass the desired values on the 'make' command line.
508$(am__recursive_targets):
509        @fail=; \
510        if $(am__make_keepgoing); then \
511          failcom='fail=yes'; \
512        else \
513          failcom='exit 1'; \
514        fi; \
515        dot_seen=no; \
516        target=`echo $@ | sed s/-recursive//`; \
517        case "$@" in \
518          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
519          *) list='$(SUBDIRS)' ;; \
520        esac; \
521        for subdir in $$list; do \
522          echo "Making $$target in $$subdir"; \
523          if test "$$subdir" = "."; then \
524            dot_seen=yes; \
525            local_target="$$target-am"; \
526          else \
527            local_target="$$target"; \
528          fi; \
529          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
530          || eval $$failcom; \
531        done; \
532        if test "$$dot_seen" = "no"; then \
533          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
534        fi; test -z "$$fail"
535
536ID: $(am__tagged_files)
537        $(am__define_uniq_tagged_files); mkid -fID $$unique
538tags: tags-recursive
539TAGS: tags
540
541tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
542        set x; \
543        here=`pwd`; \
544        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
545          include_option=--etags-include; \
546          empty_fix=.; \
547        else \
548          include_option=--include; \
549          empty_fix=; \
550        fi; \
551        list='$(SUBDIRS)'; for subdir in $$list; do \
552          if test "$$subdir" = .; then :; else \
553            test ! -f $$subdir/TAGS || \
554              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
555          fi; \
556        done; \
557        $(am__define_uniq_tagged_files); \
558        shift; \
559        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
560          test -n "$$unique" || unique=$$empty_fix; \
561          if test $$# -gt 0; then \
562            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
563              "$$@" $$unique; \
564          else \
565            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
566              $$unique; \
567          fi; \
568        fi
569ctags: ctags-recursive
570
571CTAGS: ctags
572ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
573        $(am__define_uniq_tagged_files); \
574        test -z "$(CTAGS_ARGS)$$unique" \
575          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
576             $$unique
577
578GTAGS:
579        here=`$(am__cd) $(top_builddir) && pwd` \
580          && $(am__cd) $(top_srcdir) \
581          && gtags -i $(GTAGS_ARGS) "$$here"
582cscope: cscope.files
583        test ! -s cscope.files \
584          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
585clean-cscope:
586        -rm -f cscope.files
587cscope.files: clean-cscope cscopelist
588cscopelist: cscopelist-recursive
589
590cscopelist-am: $(am__tagged_files)
591        list='$(am__tagged_files)'; \
592        case "$(srcdir)" in \
593          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
594          *) sdir=$(subdir)/$(srcdir) ;; \
595        esac; \
596        for i in $$list; do \
597          if test -f "$$i"; then \
598            echo "$(subdir)/$$i"; \
599          else \
600            echo "$$sdir/$$i"; \
601          fi; \
602        done >> $(top_builddir)/cscope.files
603
604distclean-tags:
605        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
606        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
607
608distdir: $(DISTFILES)
609        $(am__remove_distdir)
610        test -d "$(distdir)" || mkdir "$(distdir)"
611        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
612        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
613        list='$(DISTFILES)'; \
614          dist_files=`for file in $$list; do echo $$file; done | \
615          sed -e "s|^$$srcdirstrip/||;t" \
616              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
617        case $$dist_files in \
618          */*) $(MKDIR_P) `echo "$$dist_files" | \
619                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
620                           sort -u` ;; \
621        esac; \
622        for file in $$dist_files; do \
623          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
624          if test -d $$d/$$file; then \
625            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
626            if test -d "$(distdir)/$$file"; then \
627              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
628            fi; \
629            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
630              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
631              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
632            fi; \
633            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
634          else \
635            test -f "$(distdir)/$$file" \
636            || cp -p $$d/$$file "$(distdir)/$$file" \
637            || exit 1; \
638          fi; \
639        done
640        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
641          if test "$$subdir" = .; then :; else \
642            $(am__make_dryrun) \
643              || test -d "$(distdir)/$$subdir" \
644              || $(MKDIR_P) "$(distdir)/$$subdir" \
645              || exit 1; \
646            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
647            $(am__relativize); \
648            new_distdir=$$reldir; \
649            dir1=$$subdir; dir2="$(top_distdir)"; \
650            $(am__relativize); \
651            new_top_distdir=$$reldir; \
652            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
653            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
654            ($(am__cd) $$subdir && \
655              $(MAKE) $(AM_MAKEFLAGS) \
656                top_distdir="$$new_top_distdir" \
657                distdir="$$new_distdir" \
658                am__remove_distdir=: \
659                am__skip_length_check=: \
660                am__skip_mode_fix=: \
661                distdir) \
662              || exit 1; \
663          fi; \
664        done
665        $(MAKE) $(AM_MAKEFLAGS) \
666          top_distdir="$(top_distdir)" distdir="$(distdir)" \
667          dist-hook
668        -test -n "$(am__skip_mode_fix)" \
669        || find "$(distdir)" -type d ! -perm -755 \
670                -exec chmod u+rwx,go+rx {} \; -o \
671          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
672          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
673          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
674        || chmod -R a+r "$(distdir)"
675dist-gzip: distdir
676        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
677        $(am__post_remove_distdir)
678
679dist-bzip2: distdir
680        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
681        $(am__post_remove_distdir)
682
683dist-lzip: distdir
684        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
685        $(am__post_remove_distdir)
686
687dist-xz: distdir
688        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
689        $(am__post_remove_distdir)
690
691dist-tarZ: distdir
692        @echo WARNING: "Support for distribution archives compressed with" \
693                       "legacy program 'compress' is deprecated." >&2
694        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
695        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
696        $(am__post_remove_distdir)
697
698dist-shar: distdir
699        @echo WARNING: "Support for shar distribution archives is" \
700                       "deprecated." >&2
701        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
702        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
703        $(am__post_remove_distdir)
704
705dist-zip: distdir
706        -rm -f $(distdir).zip
707        zip -rq $(distdir).zip $(distdir)
708        $(am__post_remove_distdir)
709
710dist dist-all:
711        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
712        $(am__post_remove_distdir)
713
714# This target untars the dist file and tries a VPATH configuration.  Then
715# it guarantees that the distribution is self-contained by making another
716# tarfile.
717distcheck: dist
718        case '$(DIST_ARCHIVES)' in \
719        *.tar.gz*) \
720          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
721        *.tar.bz2*) \
722          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
723        *.tar.lz*) \
724          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
725        *.tar.xz*) \
726          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
727        *.tar.Z*) \
728          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
729        *.shar.gz*) \
730          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
731        *.zip*) \
732          unzip $(distdir).zip ;;\
733        esac
734        chmod -R a-w $(distdir)
735        chmod u+w $(distdir)
736        mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
737        chmod a-w $(distdir)
738        test -d $(distdir)/_build || exit 0; \
739        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
740          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
741          && am__cwd=`pwd` \
742          && $(am__cd) $(distdir)/_build/sub \
743          && ../../configure \
744            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
745            $(DISTCHECK_CONFIGURE_FLAGS) \
746            --srcdir=../.. --prefix="$$dc_install_base" \
747          && $(MAKE) $(AM_MAKEFLAGS) \
748          && $(MAKE) $(AM_MAKEFLAGS) dvi \
749          && $(MAKE) $(AM_MAKEFLAGS) check \
750          && $(MAKE) $(AM_MAKEFLAGS) install \
751          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
752          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
753          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
754                distuninstallcheck \
755          && chmod -R a-w "$$dc_install_base" \
756          && ({ \
757               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
758               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
759               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
760               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
761                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
762              } || { rm -rf "$$dc_destdir"; exit 1; }) \
763          && rm -rf "$$dc_destdir" \
764          && $(MAKE) $(AM_MAKEFLAGS) dist \
765          && rm -rf $(DIST_ARCHIVES) \
766          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
767          && cd "$$am__cwd" \
768          || exit 1
769        $(am__post_remove_distdir)
770        @(echo "$(distdir) archives ready for distribution: "; \
771          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
772          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
773distuninstallcheck:
774        @test -n '$(distuninstallcheck_dir)' || { \
775          echo 'ERROR: trying to run $@ with an empty' \
776               '$$(distuninstallcheck_dir)' >&2; \
777          exit 1; \
778        }; \
779        $(am__cd) '$(distuninstallcheck_dir)' || { \
780          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
781          exit 1; \
782        }; \
783        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
784           || { echo "ERROR: files left after uninstall:" ; \
785                if test -n "$(DESTDIR)"; then \
786                  echo "  (check DESTDIR support)"; \
787                fi ; \
788                $(distuninstallcheck_listfiles) ; \
789                exit 1; } >&2
790distcleancheck: distclean
791        @if test '$(srcdir)' = . ; then \
792          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
793          exit 1 ; \
794        fi
795        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
796          || { echo "ERROR: files left in build directory after distclean:" ; \
797               $(distcleancheck_listfiles) ; \
798               exit 1; } >&2
799check-am: all-am
800check: check-recursive
801all-am: Makefile $(DATA)
802installdirs: installdirs-recursive
803installdirs-am:
804        for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(pkgconfigdir)"; do \
805          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
806        done
807install: install-recursive
808install-exec: install-exec-recursive
809install-data: install-data-recursive
810uninstall: uninstall-recursive
811
812install-am: all-am
813        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
814
815installcheck: installcheck-recursive
816install-strip:
817        if test -z '$(STRIP)'; then \
818          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
819            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
820              install; \
821        else \
822          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
823            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
824            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
825        fi
826mostlyclean-generic:
827
828clean-generic:
829
830distclean-generic:
831        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
832        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
833
834maintainer-clean-generic:
835        @echo "This command is intended for maintainers to use"
836        @echo "it deletes files that may require special tools to rebuild."
837clean: clean-recursive
838
839clean-am: clean-generic clean-libtool mostlyclean-am
840
841distclean: distclean-recursive
842        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
843        -rm -f Makefile
844distclean-am: clean-am distclean-generic distclean-libtool \
845        distclean-tags
846
847dvi: dvi-recursive
848
849dvi-am:
850
851html: html-recursive
852
853html-am:
854
855info: info-recursive
856
857info-am:
858
859install-data-am: install-aclocalDATA install-pkgconfigDATA
860
861install-dvi: install-dvi-recursive
862
863install-dvi-am:
864
865install-exec-am:
866
867install-html: install-html-recursive
868
869install-html-am:
870
871install-info: install-info-recursive
872
873install-info-am:
874
875install-man:
876
877install-pdf: install-pdf-recursive
878
879install-pdf-am:
880
881install-ps: install-ps-recursive
882
883install-ps-am:
884
885installcheck-am:
886
887maintainer-clean: maintainer-clean-recursive
888        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
889        -rm -rf $(top_srcdir)/autom4te.cache
890        -rm -f Makefile
891maintainer-clean-am: distclean-am maintainer-clean-generic
892
893mostlyclean: mostlyclean-recursive
894
895mostlyclean-am: mostlyclean-generic mostlyclean-libtool
896
897pdf: pdf-recursive
898
899pdf-am:
900
901ps: ps-recursive
902
903ps-am:
904
905uninstall-am: uninstall-aclocalDATA uninstall-pkgconfigDATA
906
907.MAKE: $(am__recursive_targets) install-am install-strip
908
909.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
910        am--refresh check check-am clean clean-cscope clean-generic \
911        clean-libtool cscope cscopelist-am ctags ctags-am dist \
912        dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
913        dist-tarZ dist-xz dist-zip distcheck distclean \
914        distclean-generic distclean-libtool distclean-tags \
915        distcleancheck distdir distuninstallcheck dvi dvi-am html \
916        html-am info info-am install install-aclocalDATA install-am \
917        install-data install-data-am install-dvi install-dvi-am \
918        install-exec install-exec-am install-html install-html-am \
919        install-info install-info-am install-man install-pdf \
920        install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
921        install-strip installcheck installcheck-am installdirs \
922        installdirs-am maintainer-clean maintainer-clean-generic \
923        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
924        ps ps-am tags tags-am uninstall uninstall-aclocalDATA \
925        uninstall-am uninstall-pkgconfigDATA
926
927.PRECIOUS: Makefile
928
929
930dist-hook:
931        if test -x /usr/bin/git -a -d .git; then git log >ChangeLog ; cp ChangeLog $(distdir); fi
932        test -d $(distdir)/win || mkdir $(distdir)/win
933        -cp $(srcdir)/win/* $(distdir)/win
934
935.PHONY:debian
936debian:
937        dpkg-buildpackage -rfakeroot
938
939# Tell versions [3.59,3.63) of GNU make to not export all variables.
940# Otherwise a system limit (for SysV at least) may be exceeded.
941.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.